ATOS ScanBox Series 4
ATOS ScanBox Series 4
Ready for immediate use thanks to plug-and-play concept: The ATOS ScanBox 4105 allows for fast and efficient inspection of small and complex parts up to 500 mm in size. For using the optical 3D measuring machine, only a normal power connection is required at the place of installation. The ATOS ScanBox 4105 is compact and mobile at the same time – four wheels allow easy repositioning within the production hall or in the measuring room. At the push of a button, you can execute all measurement and inspection processes via the Kiosk Interface and the virtual measuring room (VMR) in GOM Inspect Pro.
Immediately Ready for Operation and Easy Handling
Use the ATOS ScanBox 4105 for efficient quality control of your injection-molded parts, die cast components, tools, molds or stamping and bending parts and convince yourself of the performance of this compact 3D measuring machine.
Plug & play
Turn-key measuring cell: Since the ATOS ScanBox 4105 operates with 100–240 V, there is no need for time-consuming configuration or installation of device drivers: connect – switch on – start measuring program.
Program and control the ATOS ScanBox 4105 via a simple user interface – the Kiosk Interface. Your plant employees do not need any special knowledge for operation: insert part – select measuring program – press start button.
Fast & precise
The ATOS sensors provide quality information in a high level of detail for subsequent analysis in a short time. By using a multi-part fixture, you can measure several parts in one run – even in 24/7 operation if required: increase throughput – produce less scrap – standardize quality assurance.
GOM Inspect offers everything from a single source: scanning, inspection and reporting. Examine nominal-actual comparisons as well as GD&T tolerances directly with the Kiosk Interface. Implement necessary corrections directly thanks to easy-to-understand results: analyze completely – receive comprehensive reporting – integrate measurement results into existing processes.
With each scan, the ATOS sensors provide full-field 3D coordinates within a few seconds. Each individual measurement consists of up to 12 million independent measuring points. The excellent detail reproduction in the measurement data makes the ATOS Q and ATOS Capsule sensors suitable for measuring very small parts.
What our customers say
“The demand for complex measurement reports as a part of the R&D phase or as documentation of our running production is increasing. Ten years ago, it was only the most innovative branches which demanded this as a standard, but as time goes by the demands merge to more branches, which also affects the load that we have on our ATOS ScanBox 4105. Therefore, it is crucial that we are able to execute measurements on several shifts every day, so that the needed capacity is free to support our customers with important information about their plastic parts. We furthermore experience that the use of GPS measurements is increasing and here the ATOS ScanBox 4105 supports us in choosing the correct methods.”
Ronni Kamp, Quality Manager, HN Group A/S, Billund, Denmark
“We are now at a stage where we don’t need to make test molds for all tools before they are approved. After having scanned many test molds, we know that the tool can be used directly in production if the measuring values are green and thereby within the tolerances.”
Bjarke Nordtorp Jørgensen, Quality Manager, Ammeraal Beltech Modular A/S, Vejle, Denmark
|ATOS ScanBox 4105|
|Dimensions||1600 × 1200 × 2100 mm³|
|Power supply||Standard, 100 – 240 V (1-phase, 16 A)|
|Max. part size||Ø 500 mm|
|Max. part weight||100 kg|
|Entry||Sliding door with safety lock|
|Opening width||685 mm|
|Floor mounting or fixing||Not required, mobile|
|Loading concept||Manual, crane|
|Sensor compatibility||ATOS Q, ATOS Capsule|
Our service range after the purchase and installation of 3D measuring systems.