GOM Metrology

GOM Metrology

GOM ATOS ScanBox Series 6

ATOS ScanBox Series 6

High throughput in the production environment

ScanBox Series 6

Two models for production-accompanying quality control

In the production environment, it is important to identify, analyze and eliminate quality problems as fast as possible. For that, as many parts as possible must be completely checked in the shortest amount of time to be able to initiate targeted corrective measures at short notice and to minimize scrap. Master this challenge with ATOS ScanBox Series 6: Two different variants deliver full-field deviations between the complete actual 3D coordinates and the CAD data.

Choose ATOS ScanBox 6135 or 6235 if you need to inspect large and heavy parts with a weight of up to 5000 kg. Each optical 3D measuring machine is delivered with an industrial and high-precision 3D scanner of the ATOS series.

High load capacity

ATOS ScanBox 6135 is constructed for large and heavy parts. For example: cast parts, add-on parts or tools with a size of up to 3.5 m.

Two working areas

A special feature of ATOS ScanBox 6235 are the two working areas that can be operated independently from each other and therefore deliver even more precise measuring results within minimum time. The rotation table can be set up parallel to the measurement.

High throughput

Set up your parts and the fixtures on changing pallets outside ATOS ScanBox. The pallets are loaded quickly and reproducibly using positioning pins. This results in a high throughput of parts and is ideally suited for series production.

Loading and measuring at the same time

With ATOS ScanBox 6235 you can easily increase your throughput: two working areas can be operated independently from each other. The rotation table can be set up  simultaneously to the measurement. In both working areas or on the rotation tables you can place parts such as doors or trunk lids with a size of up to 3.5 m. Both working areas are operated safely due to the automatic doors.

ATOS ScanBox 6235

Intuitive loading concept

Quick loading and unloading 

Generous entry areas allow for an uncomplicated use of loading machines such as cranes, forklift trucks or pallet trucks. ATOS ScanBox Series 6 can be loaded with large and heavy parts. The maximum load of the rotation table unit is 5000 kg.

Intuitive loading concept

Quick change of parts

With ATOS ScanBox 6135 and 6235, car body parts, such as trunk lids and doors, can be measured faster with a multi-part fixture because it is not necessary to change the fixture. The multi-part fixture can be easily positioned so that the attached parts can be exchanged at the front side.

Intuitive loading concept

Virtual Measuring Room in GOM Inspect Pro

The virtual measuring room (VMR) is the central control station and measurement planning software for all elements of the ATOS measuring cells. In the VMR, the real environment, i.e. robots, sensors and parts in the measurement cell, is functionally simulated in a simulation. The programming includes the kinematics, the robot paths, the part fixture and the measurement plan. Thanks to the VMR, the user can work with the system without requiring specific robot programming skills. All robot movements are simulated and checked for safety before being performed in the actual environment.

Learn more

Virtual measuring room - For GOM Inspect Pro and GOM Blade Inspect Pro

Virtual Clamping for Hang-on Parts

Virtual Clamping technology avoids multiple measurement loops for parts that are typically measured on mechanical fixtures with four support points.

  • High accuracies 
  • Usage of simple fixtures 
  • Great time saving

LEARN MORE

Sensor Compatibility

ATOS sensors provide full-field 3D coordinates for each individual measurement. Within a few seconds, up to 12 million independent measuring points are captured per scan. As a result, the measuring data are characterized by a high detail reproduction, which enables you to also measure very small parts.

Success Stories

Van Raam special needs bicycles: Mastering mobility with 3D metrology

Bike manufacturer Van Raam increases its efficiency with ATOS ScanBox while maintaining high security and quality standards.

Read more

Success Story: SAS Autosystemtechnik GmbH

ATOS ScanBox speeds up production processes at SAS - faster inspection and highly precise data

Read more

Success Story LINDE + WIEMANN

ZEISS automated 3D metrology solutions support LINDE + WIEMANN throughout the manufacturing process.

Read more

Success Story Coko

The full-field measurement results of the ScanBox enable Coko a faster first article inspection and target-oriented tool corrections.

Read more

Technical Information


ATOS ScanBox 6135
ATOS ScanBox 6235
Dimensions 4500 × 4500 × 3250 mm 7665 × 4500 × 3250 mm
Power supply 200–500 V (3-phase, 32 A) 200–500 V (3-phase, 32 A)
Max. part size Ø 3500 mm
2× Ø 3000 mm
Max. part weight 5000 kg* 2× 5000 kg*
Entry Safety light curtains Safety light curtains
Opening width 2850 mm 2850 mm
Floor mounting or fixing Required Required
Loading concept
Manual, transport cart, pallet truck, crane, forklift truck Manual, transport cart, pallet truck, crane, forklift truck
Sensor compatibility ATOS 5, ATOS 5X

ATOS 5, ATOS 5X

 

*in combination with a palett system: 2000 kg

Contact us

Would you like to learn more about our products or services? We are happy to provide you with more information or a demo – from remote or onsite.

Contact

GOM Contact

Services

GOM Care

With GOM Care, customers receive comprehensive support and services on a contractual basis for 3D measuring systems from GOM. These services include remote support via telephone or online, maintenance and on-site repair and support and service contracts.

MORE ›

Digital Assembly in Car Body Manufacturing

GOM Training – Digital Assembly in Car Body Manufacturing

The expert course especially addresses users from the automotive industry. It deals with quality control of the outer skin parts of the car body in assembly situations.

MORE ›

Automation VMR

GOM Training – Automation VMR

In this two-day training course, participants carry out the entire measuring procedure in the VMR and create a complete measurement program offline that is subsequently run in ATOS ScanBox.

MORE ›