GOM Metrology

ATOS ScanBox Series 6

High throughput in the production environment

ATOS ScanBox Series 6

Three models for production-accompanying quality control

In the production environment, it is important to identify, analyze and eliminate quality problems as fast as possible. For that, as many parts as possible must be completely checked in the shortest amount of time to be able to initiate targeted corrective measures at short notice and to minimize scrap. Master this challenge with ATOS ScanBox Series 6: Three different variants deliver full-field deviations between the complete actual 3D coordinates and the CAD data.

ATOS ScanBox 6130 is your entry-level model for full-field inspection of parts with a size of up to 3000 mm. Choose ATOS ScanBox 6135 or 6235 if you need to inspect large and heavy parts with a weight of up to 5000 kg. Each optical 3D measuring machine is delivered with an industrial and high-precision 3D scanner of the ATOS series.

Entry solution for production monitoring

As an entry solution for the digitization for large objects, ATOS ScanBox 6130 is particularly suited for measuring sheet metal parts, assemblies, cast parts and turbine components.

High load capacity

ATOS ScanBox 6135 is constructed for large and heavy parts. For example: cast parts, add-on parts or tools with a size of up to 3.5 m.

Two working areas

A special feature of ATOS ScanBox 6235 are the two working areas that can be operated independently from each other and therefore deliver even more precise measuring results within minimum time. The rotation table can be set up parallel to the measurement.

High throughput

Set up your parts and the fixtures on changing pallets outside ATOS ScanBox. The pallets are loaded quickly and reproducibly using positioning pins. This results in a high throughput of parts and is ideally suited for series production.

Loading and measuring at the same time

With ATOS ScanBox 6235 you can easily increase your throughput: two working areas can be operated independently from each other. The rotation table can be set up  simultaneously to the measurement. In both working areas or on the rotation tables you can place parts such as doors or trunk lids with a size of up to 3.5 m. Both working areas are operated safely due to the automatic doors.

Intuitive loading concept

Quick loading and unloading 

Generous entry areas allow for an uncomplicated use of loading machines such as cranes, forklift trucks or pallet trucks. ATOS ScanBox Series 6 can be loaded with large and heavy parts. The maximum load of the rotation table unit is 5000 kg.

Quick change of parts

With ATOS ScanBox 6135 and 6235, car body parts, such as trunk lids and doors, can be measured faster with a multi-part fixture because it is not necessary to change the fixture. The multi-part fixture can be easily positioned so that the attached parts can be exchanged at the front side.

Virtual Measuring Room in GOM Inspect Pro

The virtual measuring room (VMR) is the central control station and measurement planning software for all elements of the ATOS measuring cells. In the VMR, the real environment, i.e. robots, sensors and parts in the measurement cell, is functionally simulated in a simulation. The programming includes the kinematics, the robot paths, the part fixture and the measurement plan. Thanks to the VMR, the user can work with the system without requiring specific robot programming skills. All robot movements are simulated and checked for safety before being performed in the actual environment.

Learn more

バーチャル測定室

Sensor Compatibility

ATOS sensors provide full-field 3D coordinates for each individual measurement. Within a few seconds, up to 12 million independent measuring points are captured per scan. As a result, the measuring data is characterized by very high detailed reproduction, thereby enabling very small component features to be measured.

Success Stories

Van Raam special needs bicycles: Mastering mobility with 3D metrology

Bike manufacturer Van Raam increases its efficiency with ATOS ScanBox 6130 while maintaining high security and quality standards.

Read more

ATOS ScanBox 6130 accelerates measurements of sheet metal car body parts

The automotive supplier reduces measuring times in toolmaking, production and assembly by up to 50 percent with 3D measuring systems.

Read more

Technical Information


ATOS ScanBox 6130
ATOS ScanBox 6135
ATOS ScanBox 6235
Dimensions 4250 × 4250 × 2700 mm 4500 × 4500 × 3250 mm 7665 × 4500 × 3250 mm
Power supply 200–500 V (3-phase, 16 A) 200–500 V (3-phase, 32 A) 200–500 V (3-phase, 32 A)
Max. part size Ø 3000 mm
Ø 3500 mm
2× Ø 3000 mm
Max. part weight 2000 kg 5000 kg* 2× 5000 kg*
Entry Safety light curtains Safety light curtains Safety light curtains
Opening width 3100 mm
2850 mm 2850 mm
Floor mounting or fixing Required
Required Required
Loading concept
Manual, transport cart, pallet truck, crane, forklift truck Manual, transport cart, pallet truck, crane, forklift truck Manual, transport cart, pallet truck, crane, forklift truck
Sensor compatibility ATOS Capsule, ATOS 5
ATOS 5, ATOS 5X

ATOS 5, ATOS 5X

 

*in combination with a palett system: 2000 kg

お問い合わせ

当社の製品やサービスについて詳しくお知りになりたい場合は、リモートまたはオンサイトで詳細情報の提供やデモサービスをご利用いただけます。

お問い合わせ

GOMに関するお問い合わせ

Services

GOM Care

With GOM Care, customers receive comprehensive support and services on a contractual basis for 3D measuring systems from GOM. These services include remote support via telephone or online, maintenance and on-site repair and support and service contracts.

MORE ›

GOM Training – Digital Assembly in Car Body Manufacturing

The expert course especially addresses users from the automotive industry. It deals with quality control of the outer skin parts of the car body in assembly situations.

MORE ›

GOM Training – Automation VMR

In this two-day training course, participants carry out the entire measuring procedure in the VMR and create a complete measurement program offline that is subsequently run in ATOS ScanBox.

MORE ›