GOM Metrology

GOM Metrology

ATOS 5X in use

ATOS 5X

for Automotive Car Body Inspection

ATOS 5X

Automated Large Volume 3D Scanning

With its powerful light source, ATOS 5X enables the use of large measuring volumes for maximum speed in automated applications. In combination with the ATOS ScanBox series, ATOS 5X is a high-end scanning system for tool, press and body shops.

ATOS 5X Software automated large field 3D scanning
ATOS 5X close-up

High-Speed Technology

ATOS 5X uses the integrated Laser Light Compressor to generate ultra-bright light. This allows for measuring areas of up to 1000 mm and at the same time extremely short exposure times. Acquisition times of 0.2 seconds are reached.

ATOS 5X in use

Innovations

Extremely bright laser light source
Resistant to ambient light conditions
Robust sensor design
High accuracy in rough environments
Short exposure times
Even for dark and shiny surfaces
Interference-free data transfer
Intelligent sensor communication using fiber optics
High detail resolution
Low noise level and precise coverage of complex geometries
Process safety
In industrial applications
ATOS 5X Plus with car body

Fast Inspection with GOM Data Quality

Speed up your process

The automated measurement of a complete car body both outside and inside typically takes 30 minutes with ATOS 5X – including the precise coverage of complex geometries. The system enables the highest possible throughput, with the main application areas in Meisterbock and Cubing, inspection of complete vehicles and quality control in body manufacturing.

Get the highest data quality

ATOS 5X delivers full-field data for comprehensive process and quality control of hang-on parts, side panels and complete car bodies. The data quality generated by the sensor is particularly evident in the detail sharpness of the 3D models, allowing an advanced inspection of character lines, radii, trimmed edges and hole patterns.

Features

Prior to the actual physical assembly, the measured parts can be virtually aligned. Information on gap and flush or functional dimensions can be evaluated at an early stage. Measuring results deriving from different departments or even from suppliers can be evaluated centrally. This way, a car body can be analyzed irrespectively of Meisterbock or cubing.

ATOS 5X Software automated large field 3D scanning

ATOS 5 Product Family

Industrial 3D Metrology with High-Speed Technology

ZEISS ATOS LRX from front ZEISS ATOS LRX ATOS 5 for Airfoil from front ATOS 5 for Airfoil ATOS 5 from front ATOS 5 ATOS 5X from front ATOS 5X
 
Technical Data        
Your system for: 3D scanning for very large volumes precise scanning of smallest details high-speed 3D scanning system automated scanning for large volumes
Light source LASER LED LED LASER
Measuring points per scan 12 m 12 m 8 or 12 m 12 m
Working distance 1810 mm 530 mm 880 mm 880 mm
  More More More

Contact us

Would you like to learn more about our products or services? We are happy to provide you with more information or a demo – from remote or onsite.

Contact

GOM Contact