Metrologia di precisione industriale 3D
Advanced Training
GOM’s advanced training courses provide in-depth background information on specific topics. Participants have the possibility to gain a deeper insight into the GOM software and to learn advanced functions for their applications. Participating in an advanced training course requires basic knowledge acquired in the preceding training courses.
Product Training for Advanced Users
The two-day training course teaches all of the concepts and operating methods required to work with the Virtual Measuring Room. ATOS Professional VMR or GOM Inspect Professional VMR software is required.
At the end of the training participants are able to:
- Operate the virtual measuring room
- Align CAD models in the virtual measuring room
- Reproducibly position measuring objects
- Teach the robot using different methods, e.g. manually, fully automatically
- Optimize robot paths
- Create virtual measurement series
- Create VMR project templates
- Manage measuring setups, measure bottom surfaces
- Teaching fixtures, photogrammetry
- Use an ATOS sensor with photogrammetry camera in the VMR
- Real moving measuring in the VMR
Prerequisites: Successful completion of ATOS Professional System Basic Training
Target group: Users of ATOS ScanBox or automated project cells and ATOS Professional VMR or GOM Inspect Professional VMR
Certificate: Automation VMR
Dates in Germany:
Braunschweig
GOM GmbH, Schmitzstraße 2
- April 26 - April 27, 2018 (Week 17)
- May 17 - May 18, 2018 (Week 20)
- May 31 - June 01, 2018 (Week 22)
- June 28 - June 29, 2018 (Week 26)
- July 19 - July 20, 2018 (Week 29)
- August 16 - August 17, 2018 (Week 33)
- September 13 - September 14, 2018 (Week 37)
Göppingen
topometric GmbH, Wilhelm-Zwick-Straße 7
- May 03 - May 04, 2018 (Week 18)
- June 07 - June 08, 2018 (Week 23)
- July 12 - July 13, 2018 (Week 28)
- August 09 - August 10, 2018 (Week 32)
- August 30 - August 31, 2018 (Week 35)
- September 27 - September 28, 2018 (Week 39)
Send your request now:
The concept of scripting is based on a macro recorder that can record all operations executed in the software. The two-day training course provides users who have experience in the software-based evaluation of 3D objects with an introduction to the basics of script recording. In addition, reworking and expansion of the script, access to element values of the project and creation of user-defined dialogs also form part of the training course. Scripting can be used in all Professional software versions.
The following topics will be discussed:
- Arithmetic data types and calculations
- Simple text modification with strings
- Conditional execution and loop statements
- The structured data types list and tuple
- Functions and structuring of scripts
- Simple file operations
- Recording and modifying scripts
- Overview of the tools of the script editor
- Accessing element values of the project from the script
- Creating user-defined graphical dialogs
Prerequisites: Successful completion of the inspection module of one of the basic training courses, knowledge of programming vocabulary, basic command of English
Target group: Users who are experienced in evaluating 3D objects in a GOM Professional software
Certificate: GOM Scripting – Python Scripting for GOM Applications
Dates in Germany:
Braunschweig
GOM GmbH, Schmitzstraße 2
- May 02 - May 03, 2018 (Week 18)
- June 11 - June 12, 2018 (Week 24)
Trainings in English
- May 23 - May 24, 2018 (Week 21)
- October 17 - October 18, 2018 (Week 42)
Send your request now:
The Kiosk Interface is an integral component of the ATOS Professional software that automatically realizes the entire procedure of measuring projects based on a template. It can be used in combination with all automated ATOS system solutions. The scripting interface allows individual modifications.
During the one-day training course, participants learn the basics of the Kiosk Interface. In addition, the training deals with modifications and enhancements of the user interface.
At the end of the training participants are able to:
- Set up the Kiosk Interface using the Setup script
- Configure the Kiosk Interface
- Set up Kiosk users
- Adjust the Kiosk Interface using the scripting interface
- Expand exports via scripting and the CustomPatchGenerator script
- Use advanced file operations in scripts
- Complement project keywords using the CustomPatchGenerator script
- Choose templates automatically by pattern matching with the serial number
Prerequisites: Successful completion of GOM Scripting and Automation (VMR)
Target group: Users who are experienced in evaluating and scripting with ATOS Professional
Certificate: KIOSK Interface – Setup and Customization
Dates in Germany:
Braunschweig
GOM GmbH, Schmitzstraße 2
- June 13, 2018 (Week 24)
Trainings in English
- May 25, 2018 (Week 21)
- October 19, 2018 (Week 42)
Send your request now:
GOM, in conjunction with dim GmbH, offers a three-day training course on the subject of Geometric Product Specification (GPS). The training course includes a comprehensive theory section on the fundamentals as well as their practical implementation in the software. Evaluation can be carried out in ATOS Professional, GOM Inspect or GOM Inspect Professional.
The following topics will be discussed:
- Introduction to GPS and GPS basic standards
- Tolerance concepts
- Geometrical specifications
- Sizes according to ISO 14405-1/2/3
- Introduction to tolerance zones
- Concepts and rules according to ISO 1101
- Datums and datum systems
- Geometric dimensioning and tolerancing (GD&T)
- Maximum material condition
- Combined features
- Applications in GOM Inspect
- Principles according to ISO 8015
- Measurement uncertainty
Prerequisites: Successful completion of Inspection Basic Training – 3D Metrology (inspection module of the ATOS Professional System Basic Training)
Target group: Users who are experienced in evaluating 3D objects in a GOM Professional software
Certificate: GD&T – With GOM to GPS
Dates in Germany:
Braunschweig
GOM GmbH, Schmitzstraße 2
- June 05 - June 07, 2018 (Week 23)
Trainings in English
- July 31 - August 02, 2018 (Week 31)
Untereisesheim
dim GmbH, Im Kressgraben 19-21
- April 24 - April 26, 2018 (Week 17)
Send your request now: