ScanBox Series 5
The ATOS ScanBox 5108 can be used for inspecting parts up to a size of 800 mm. Due to the small dimensions of the ATOS ScanBox, the system is often used by manufacturers of turbines, fans, blisks and cast housings. In airfoil inspections, this model can be used for measuring sharp radii in positions and contours with a detail resolution of more than 20 measuring points per millimeter.
As parts of up to 2000 mm in size can be easily measured with the ATOS ScanBox 5120, this model is mainly used for larger parts, such as interior components of vehicles. However, the ATOS ScanBox 5120 has also proven its efficiency in casting and forging applications such as the inspection of cast parts, sand cores and models.
|ATOS ScanBox 5108||ATOS ScanBox 5120|
|Dimensions||2000 × 2550 × 2700 mm³||3300 × 3300 × 2700 mm³|
|Power supply||200 – 500 V (3-phase, 16 A)||200 – 500 V (3-phase, 16 A)|
|Max. part size||Ø 800 mm||Ø 2000 mm|
|Max. part weight||300 kg||500 kg|
|Entry||Sliding door with safety lock||Sliding door with safety lock|
|Opening width||800 mm||1400 mm|
|Floor mounting or fixing||Not required||Not required|
|Loading concept||Manual||Manual, transport cart, pallet truck|
|Sensor compatibility||ATOS Capsule, ATOS Triple Scan, ATOS 5||ATOS Capsule, ATOS Triple Scan, ATOS 5|
The virtual measuring room is the central control station and measurement planning software for all elements of the ATOS measuring cells. It offers the functional representation of a real measurement environment in a virtual simulation. Thanks to the VMR, the user can work with the system without requiring specific robot programming skills. All robot movements are simulated and checked for safety before being performed in the actual environment.