GOM presents the optical desktop scanner ATOS ScanPort. The scanner has been developed for measurement and inspection of small components. It has a 3+3 kinematic with three motorized and three manual axes. Especially recurring measurement tasks are simplified with the automated rotation, tilt and linear axis. The movements of lift and rotation table as well as the different tilting angles of the rotation table can be recorded with the Motion Replay software functionality – without the need for prior programming. Thus, when users need to measure identical or similar multiple parts, these measurement positions are simply played back.
ATOS ScanPort is a docking station for the optical 3D scanner ATOS Core, which performs full-field, non-contact part measurements. Four models with different resolutions are available. Depending on resolution requirements and measuring volumes, the convenient sensor heads can be swapped easily via a quick release, without the need for re-calibration.
ATOS ScanPort is ideal for digitizing and inspection of cast and plastic parts as well as prototypes and electrodes with up to 200-mm diameter. A compact operating unit directly controls the motorized axes with a joystick. ATOS ScanPort is directly connected to the computer via USB and network cable. The desktop scanner is available in combination with various GOM software packages. Functions range from simple 3D scanning tasks for applications such as 3D printing, reverse engineering and rapid prototyping, up to comprehensive shape and dimension analysis of components.