News History

GOM Workshop Sheet Metal Forming on May 20, 2015 in Germany

02/2015 The GOM Workshop “3D Metrology in Sheet Metal Forming Process Chains” on May 20, 2015 in Darmstadt will show how 3D measuring systems are used in stamping, bending, drawing, pressing, and forming process chains for quality assurance.

Metronic Organized a Casting and Forging Workshop in Spain

02/2015 On 6th November 2014, our Spanish distributor Metronic held a Casting and Forging Workshop in the Automotive Intelligence Center in Bizkaia, Spain.

Automotive Testing: Optical 3D Metrology improves Safety and Comfort

02/2015 To speed up design, simulation and development cycles, the automotive industry relies on optical measuring systems. Applications include crash, impact and component tests as well as climate chamber, wind tunnel and fatigue testing.

Casting and Forging Workshop in Brazil

02/2015 On 5th November 2014, our Brazilian partner Robtec held a Casting and Forging Workshop in São Paulo. Some 50 participants joined the event at the Holiday Inn hotel in order to learn about the latest developments in optical 3D metrology for the casting and forging industries.

CIM Co. held Casting and Forging Workshop in Mexico

02/2015 On 24th September 2014, our Mexican distributor CIM Co. hosted a user meeting in Monterrey and presented the latest developments in industrial 3D metrology for casting and forging processes to some 30 participants.

GOM 3D Metrology Conference - Save the Date

02/2015 The GOM Conference from 21st to 24th September 2015 in Braunschweig, Germany will show in user presentations, live demonstrations and the trade show, how optical measuring systems shorten development cycles and improve production processes.

GOM UK Convention 2015

01/2015 The GOM UK Convention 2015 focuses on the integration of optical measuring techniques in industry and research. The conference offers a platform to exchange experiences about measurement solutions and applications using the GOM optical measuring systems. The GOM UK Convention 2015 will take place from 25-26 February 2015 at The Warwickshire, Warwick, United Kingdom.

Non-Contact Measuring Systems Support Certification of Airbus A350

01/2015 For the load, fatigue and damage tolerance tests of the A350 winglet, Airbus supplier FACC and its subsidiary CoLT for the first time fully integrated non-contact measuring systems from GOM in the test setup.

Application Webinar - Automotive Testing

01/2015 GOM invites you to a Webinar which will discusses applications from the automotive industry in the areas of stiffness- and crash testing, motion analysis and the evaluation of thermal deformation of components tested in climate chambers.

GOM Partner Lenso organized 3D User Meeting in Poland

01/2015 Our Polish partner Lenso held a four-day 3D User Meeting. More than 100 participants attended the event at the Remes hotel in Opalenica, Poland, from 16th to 19th September 2014.

We wish you a merry christmas and a happy new year 2015

12/2014 This holiday greeting has become a little tradition for the upcoming holidays: For several years now, we have been supporting two organizations which help to alleviate poverty and provide hope. Right now this assistance is especially important.

GOM Italia inaugurated a new location for events

12/2014 GOM Italia expanded its location, restyling the hangar into a comfortable place, well-equipped to welcome customers and show current products and technologies during events and live demonstrations.

Application Webinar - Biomechanics/Medical

12/2014 GOM invites you to a Webinar which will discuss various applications for optical 3D metrology in the area of medical / biomechanics testing and quality control.

GOM Testing Workshop: Optical Measuring Systems replace conventional Methods

12/2014 In order to speed up the product creation process, design and test engineers as well as specialists from research & development rely on optical measurement systems. This is what the exchange of experts revealed at the GOM Testing Workshop.

User meeting in Thailand presented latest developments in GOM technology

12/2014 In October, our distributor Mentel held an user meeting in Bangkok, Thailand, and presented the latest developments and technologies of optical 3D metrology from GOM to some 50 participants from industry and research.

ATOS ScanPort - New Desktop Scanner for small components

12/2014 The ATOS ScanPort is an optical desktop scanner for measuring and inspection of small parts. The ATOS ScanPort utilises a 3+3 kinematic with three motorised and three manual axes. Repeating tasks are simplified with the fully automated rotation, tilt and linear axes.

GOM Italia closes for Christmas Holidays

12/2014 GOM Italia offices will be closed for Christmas holidays from December 25th to December 26th, 2014, and also from January 1st to January 2nd, 2015.

Industrial 3D Scanner with 16 Million Pixels

11/2014 GOM has extended its series of industrial 3D scanners with the model ATOS Triple Scan 16M. The new 3D digitizer captures two times 16 million measuring points per scan and is suitable for quality control of medium-sized components with high-resolution requirements.

GOM presents latest technology at EuroMold - Order your free ticket

11/2014 At the EuroMold 2014 in Hall 8 GOM will be presenting the newest developments in precise industrial 3D metrology, including ATOS ScanPort, ATOS Triple Scan 16M and the V8 Software. In Hall 11 GOM’s experts will additionally be showcasing the ATOS Core sensor and ATOS for Education package.

GOM Inspect Introduction Seminars – Dates for 2015

11/2014 Next year, GOM will be offering new GOM Inspect Introduction Seminars in Braunschweig. On six regular dates, users from the fields of RP, CAD/CAM, CAE and CAQ will get the chance to test GOM Inspect in practice.

GOM France - Bègles Open Days 2014

11/2014 On November 18-19, 2014 the team of GOM France will inaugurate its new agency in Bègles (Gironde) in the south-west. In the presence of industrial experts from the south/south-west, GOM users and experts will exchange information about technological advances and the latest developments.

Two successful Casting Workshops in Vietnam

11/2014 In September, our distributor AIE organized two workshops in the north and south of Vietnam. The main objective of the two events was to highlight the importance of optical metrology for the casting industry.

Injection Molding Workshop in Sweden

10/2014 On September 25, 2014, our Swedish distributor Cascade welcomed around 65 attendees to the Injection Molding Workshop in Mölndal in order to share its experience about the latest trends in the injection molding industry.

GOM Workshop in Italy - 3D Coordinate Measuring Techniques in Injection Molding

10/2014 The GOM Workshop is an industrial meeting platform for design engineers, tool and mold makers as well as specialists from quality assurance and production. The free workshop offers an insight into how optical 3D metrology is integrated into modern injection molding process chains.

Application Webinar - Aerospace Testing

09/2014 GOM invites you to a Webinar which will discuss applications from the aerospace industry using ARAMIS and PONTOS covering topics from smaller scale measurement such as coupon- and element testing up to evaluation of sub-components deformation behavior.

GOM Inspect Introduction Seminars – Dates in September, October and November

08/2014 The next regular GOM Inspect Introduction Seminars will be held in Braunschweig on September 29 and November 10, 2014. There are still some seats available for the date in November. Furthermore, we are pleased to offer an additional seminar on October 06, 2014.

Summer closure GOM Italia

08/2014 GOM Italia offices will be closed for summer holidays from August 11th to August 17th, 2014 (incl.).

Images replace numbers: Quality assurance of plastic parts with 3D measurement

08/2014 Since Braun introduced optical measuring systems to its quality assurance process, first article inspection has been accelerated significantly. In addition, the company has been able to simplify technical drawings and inspection reports.

V8 – New Version of the 3D Digitizing and Inspection Software

07/2014 GOM's V8 software for ATOS, TRITOP, PONTOS Live, GOM Inspect and GOM Inspect Professional has now been launched in the market. The new application solutions provide enhanced optimization of measurement processes and increase inspection efficiency.

New GOM V8 Software / Training Webinars

07/2014 GOM is launching the new V8 Software with a range of new features for 3D measurement and 3D inspection. In conjunction with the release of the software, GOM is running a series of webinars to give you an introduction to the new software functionalities.

GOM launches new V8 Software

07/2014 GOM is launching the new GOM V8 Software for ATOS, TRITOP, PONTOS, GOM Inspect and GOM Inspect Professional with a range of new features for 3D measurement and 3D inspection.

Combining CAD/CAM, simulation and optical metrology for faster tool try-out

07/2014 For complex sheet metal parts, tool making is a long trial-and-error process. But the Bernecker Group has combined a CAD/CAM solution with a simulation software and optical metrology to significantly reduce the number of tool iterations.

The rolling out of GOM Inspect at Bosch is explained by the users’ long-standing trust

06/2014 The specialists from Bosch benefit from GOM Inspect as the software provides an extensive portfolio of information for their measurement work.

Roadshow Piemonte “Technology at the service of manufacturing”

06/2014 This event will take place at Settimo Torinese. The main theme on focus will be: manufacturing for mould production, aerospace and mechanical industry.

Optical Metrology supports the Building of full-scale Helicopter Mock-ups

Photo: Reiser Systemtechnik

05/2014 To support the training of maintenance crews for military helicopters, Reiser Systemtechnik uses optical 3D metrology when building full-scale helicopter training rigs. This saves time and money, and also ensures a high level of precision.

GOM workshop in Italy - Optical Measuring Techniques in Casting & Forging

05/2014 On June 13, 2014 the free GOM Workshop offers an insight into how optical 3D metrology is an industrial standard all over the world. This technology supports and speeds up all phases in the production processes: from mold and core making, right through to first article inspection. User presentations and live demonstrations staged by our GOM team are scheduled!

Affidabilità & Tecnologie 2014

05/2014 Grande affluenza alla fiera AFFIDABILITÀ & TECNOLOGIE svoltasi a Torino dal 16 al 17 Aprile! GOM Italia ha presentato con successo i nuovissimi e versatili sensori ATOS Core e ATOS Compact Scan: un concentrato di tecnologia e flessibilità.

GOM Inspect Introduction Seminar - Worthwhile day!

05/2014 Another GOM Inspect Introduction Seminar is going to be held in Braunschweig on June 23, 2014. In response to great demand, we are also pleased to offer an alternative date, again in Braunschweig, on July 14, 2014.

Novo Nordisk uses GOM Inspect as advanced viewer program

05/2014 The global healtcare company uses GOM Inspect as an advanced viewer program for projects generated in GOM Inspect Professional.

Application Webinar - Tensile Testing

04/2014 The determination of material parameters through tensile tests are widely used for new material developments and the control of material quality. GOM invites you to a webinar which covers the determination of material parameters and how this is performed using ARAMIS.

GOM Workshop for Material Testing in China

04/2014 Our Chinese distributor DOM 3D joined forces with GOM, Zwick and WISCO (Wuhan Iron & Steel Corp.) to hold a special workshop in Wuhan, China, on March 27 to 28, 2014. The workshop was attended by 103 interested visitors from research and industry and focused on testing sheet metal materials.

GOM at Control 2014 - Order your free ticket

04/2014 GOM presents the complete range of its state-of-the-art sensor technology and its efficient measuring and inspection software. Order your free ticket now and visit us at Control 2014.

Miele releases groupwide roll-out of GOM Inspect

04/2014 Groupwide roll-out of the free GOM Inspect software for guaranteeing a smooth data exchange between the Miele locations in Germany.

More than 170 participants at Injection Molding Workshop in Darmstadt

04/2014 For plastic components, the complexity of shapes and functions is constantly growing – with consequences for quality control. This was the result of the exchange among experts at the GOM Injection Molding Workshop in Darmstadt, Germany.

GOM at A&T exhibition: come and visit us at our booth B18, hall 3

04/2014 A&T exhibition 2014 in Turin is focusing on innovation in technology for a more competitive industrial production. For this reason, GOM is looking forward to show the brand new ATOS Core and ATOS Compact Scan to the Italian market.

ATOS for Education - GOM's new education package

ATOS for Education - GOM's new education package

03/2014 "ATOS for Education" is a complete package for theoretical and practical teaching at schools, higher education institutes and universities. The education package from GOM is used in various faculties and disciplines, including mechanical engineering, engineering, design or CAD/CAM.

Foundry modernization with optical 3D metrology solutions

Foundry modernization with optical 3D metrology solutions

03/2014 Shape and dimensional analysis of castings with tactile coordinate measuring systems has its limitations. Therefore, US steel foundry Bradken has implemented optical 3D metrology. This enables inspection processes to be accelerated.

BJB evaluates CT data with GOM Inspect Professional

03/2014 The company BJB reduced the tool release process from three or four weeks to three or four days due to GOM Inspect Professional.

Additional GOM Inspect Introduction Seminar in May 2014

03/2014 In response to the great demand for our GOM Inspect Introduction Seminar in March, we are now offering an additional event in Braunschweig on May 12, 2014. As participation is limited to ten persons per event, we advise you to register as soon as possible.

A large audience at the “GOM Inspect” workshop – New visitor record for GOM Italia

03/2014 A large audience met at the GOM Inspect Introduction Seminar in Italy. During the well-attended presentation, participants learned about the numerous features of the GOM Inspect software: CAD import, mesh generation, the creation of multiple dimensional alignments and analysis, and GD&T.

2
3
4
5
6
7
8