GOM Metrology

GOM Metrology

Faster production restart after tool change

Faster production restart after tool change

The challenge

Stamping presses produce parts very quickly. Much faster than these parts can be preassembled into assemblies during production. Due to these shorter cycle times, the presses are often used for the production of varying parts, which requires changing the tool on the press.

This tool change is a critical process, as many parameters can influence the quality of the finished pressed parts. After a tool change it is therefore necessary to check the first parts coming off the press before starting volume production.


The solution

With an ATOS system, the users can scan these parts in full 3D directly on site at the production facility. With the aid of a measurement plan, these can then be quickly checked for shape and dimensional accuracy.

In this way, it is possible to easily ensure that everything works as it should after a tool change and then immediately resume series production.

The benefits

Accelerated production start
after tool changes on stamping presses
Ensuring part geometry
after tool changes

GOM Solutions for every process step

The flexible 3D coordinate measuring systems ATOS, ARAMIS and ARGUS are used in all process steps of metal forming. Learn more about how GOM systems optimize the individual forming processes to ensure quality and process reliability.


Skontaktuj się z nami

Chcesz dowiedzieć się więcej o naszych produktach i usługach? Z przyjemnością udzielimy dodatkowych informacji i przeprowadzimy demonstrację systemu - zdalnie lub na miejscu.