The perfect combination for simple automated inspections tasks
GOM ScanCobot is a mobile measuring station with a collaborative robot, a motorized rotation table and powerful software. In a short measuring time, the optical ATOS 3D scanner captures quality information at a high level of detail, providing a reliable basis for easy interpretation. To measure a part completely, the sensor must face the part from different directions. GOM ScanCobot uses a collaborative robot to perform this normally manual work process. Combined with the motorized rotation table, the robot can move along the sensor positions very quickly one by one. Efficient scanning and subsequent automatic inspection speed up quality control processes. Measurement planning, digitizing and inspection take place in the virtual measuring room (VMR) of the powerful software GOM Inspect Pro.
Easy Robot Programming in the Virtual Measuring Room
GOM ScanCobot is programmed in the virtual measuring room (VMR) of the GOM Software. The VMR is the central control and measurement planning software that represents the complete measuring procedure. In the software, the CAD data set of the part to be inspected is imported together with the associated measurement plan. The necessary sensor positions and robot paths are computed fully automatically at the push of a button.
Automatic teaching allows the user to work with the system without the need for specific robot programming skills. If the Kiosk Interface is activated, parts can be measured quickly using existing project templates, without the need for adjustments. As the user can no longer change measuring programs and evaluations, process reliability is enhanced. With GOM ScanCobot, measuring and inspection tasks can be easily delegated from the measuring room to production.
ATOS Q – High-speed 3D scanner with superior data quality
Field of Application
GOM ScanCobot is especially suited for efficient quality control of small and medium-sized parts made of plastic, metal or cast iron. The system can be used during the preproduction phase such as design and prototyping and during the market launch.
Technical Information and Safety
GOM ScanCobot is a mobile measuring station that can easily and quickly be moved from one location to another. Only a standard socket is required for commissioning. The system can be equipped with a standardized safety housing to comply with market-specific safety regulations.
|Dimensions footprint [mm]||975 x 775|
|Working height [mm]||1000|
||Standard, 100–240 V (1-phase, 16A)
|Max. part size [diameter in mm]
|Max. part weight [kg]
Po zakupie i instalacji systemów pomiarowych 3D firma GOM zapewnia swoim klientom wsparcie techniczne.