Home Nieuws 

Nieuws Historiek

Capture 3D Measurement Innovation Conference and 3D Expo in Californië
10/2012 Op 21 tot 23 augustus 2012 vond in Costa Mesa, Californië, de bijeenkomst "Capture 3D Measurement Innovation Conference and 3D Expo" plaats. Bezocht werd de conferentie door meer dan 170 klanten en potentiële klanten.
Feature Highlights van de nieuwe GOM software V7.5 SR1
09/2012 Met de meest actuele softwareversie biedt GOM een breed spectrum aan nieuw ontwikkelde functies voor meer efficiëntie van het meetproces en een sneller en eenvoudiger verloop van de daaropvolgende inspectie resp. analyse.
Website https://www.gom.com now also in Italian
09/2012 Starting today, the https://www.gom.com website is also available in Italian. This step is designed to give existing and prospective customers in Italy a better insight and understanding of metrology solutions from GOM.
Visit GOM on BI-MU 2012, Hall 09, booth C44
09/2012 At the international trade show BI-MU in Milan, Italy, GOM presents once again its state-of-the-art sensor technology, efficient measuring and inspection software and tailor-made 3D metrology solutions.
GOM brings new software version V7.5 SR1 to market
09/2012 GOM will be offering a new 3D software version with an expanded and optimized range of functions for inspection and analysis of data records from September 10, 2012.
GOM Inspect Introduction Seminar - Our know-how for your success
09/2012 Take this opportunity to register today for the GOM Inspect Introduction Seminar.
GOM UK Open House Event
GOM UK Open House Event 2012
08/2012 On September 13, 2012 from 10 am until 17 pm our GOM office in England will invite you to discover the latest GOM technologies - Sign up now!
ATOS ScanBox in use - Watch a complete workflow
ATOS ScanBox in use
08/2012 Two films showing the complete workflow of the optical 3D measuring machine.
Summer closure GOM Italia
07/2012 GOM Italia offices will be closed for summer holidays from August 10th, to August 27th 2012 (incl.).
GOM Conference 2012 set a further milestone within optical metrology
06/2012 For the 10th time GOM held the Optical Metrology conference in Braunschweig, Germany. More than 600 participants from 40 countries accepted the invitation to this year´s GOM Conference, which took place from June 18th till June 21st.
Optical Metrology 2012
06/2012 Updated program available
Changed driving directions to GOM head offices
06/2012 New access route to GOM head offices in Braunschweig due to roadworks
Sign up for GOM Inspect Introduction Seminars
GOM Inspect Introduction Seminars
06/2012 Learn about using the GOM Inspect software
New address in the UK
New address in the UK
05/2012 GOM UK Ltd. has moved within Coventry to the Cobalt Centre. The new business premises offer more space for the growing requirements of customer service and support in the UK. GOM can already be reached at the new address.
ATOS ScanBox: Mobile Plug and play solution for automated 3D metrology
05/2012 GOM sets new standards in automated inspection with its new ATOS ScanBox. The mobile turnkey concept is the ideal solution for automatic measurement and inspection. ATOS ScanBox is quickly operational and combines flexible usage with maximum reliability.
Optical Metrology 2012: Preliminary program available
04/2012 Airbus, BMW, EDAG, Eurocopter, Gedia, NASA, Rolls Royce, Samsung, Volkswagen, ...
Order your free ticket to visit GOM at Automatica 2012
04/2012 At the Automatica 2012 we will be presenting our complete range of 3D coordinate measuring systems including a new optical 3D measuring machine setting new standards in automated 3D metrology solutions. Using the GOM automated metrology solutions, inspection in the entire process chain becomes an integral part of quality assurance in production processes.
Touch screen, automated inspection solution at Control 2012
04/2012 Experience the new mile stones in Optical 3D-Metrology including a plug & play optical 3D measuring machine with touch screen technology, state of the art 3D scanning technology, powerful, free inspection and mesh processing software solutions and material testing and dynamic component testing systems all allowing faster and efficient quality control.
Deformation measurement: New partner in China
03/2012 Our distributor network is being extended in the area of digital material and component testing to include Dom 3D Ltd. The company will offer comprehensive consulting services in the field of deformation on the Chinese market. With this addition, GOM is gaining an experienced partner for its customer support team in this field.
Free GOM Inspect
GOM Inspect portable Version
03/2012 GOM Inspect now also available as portable version
Optical 3D measurements providing benefits to foundry processes
Application Note - Foundry Processes
03/2012 Already before the first article inspection (FAI) of the casting, 3-D shape and dimensional analyses provide reliable information for quality control and targeted process optimization.
Optical Metrology 2012
01/2012 Optical Metrology 2012 is an international conference for integration of optical measuring techniques in industry and research. The conference offers a platform to exchange experiences about measurement solutions and applications using the GOM optical measuring systems. Optical Metrology 2012 will take place from 18th - 21st June 2012 in Braunschweig, Germany.
Order your free ticket to visit GOM at Euroguss 2012
01/2012 January 17-19, 2012, Nürnberg, Germany
New V7.5 Software release now available
GOM Software V7.5
12/2011 GOM is pleased to release the new V7.5 Software solutions. The V7.5 Software includes over 100+ innovative functions to achieve faster results, easier analysis and greater ease of use.
Wij wensen U een zalig kerstfeest en een gelukkig nieuwjaar 2012
12/2011 Dit jaar willen wij bij de komende feestdagen in plaats van traditionele geschenken iets heel bijzonders geven: nieuwe perspectieven.
ATOS Compact Scan
ATOS Compact Scan
12/2011 A new class of scanner for 3D measurement and inspection
Order your free ticket to visit GOM at Euromold 2011
10/2011 Find out more during Euromold at our Booth H70 in Hall 8 about reducing try-out periods and first article inspection times from weeks to hours as well as about shorter product ramp-up and cost reduction within Design, Casting, Sheet Metal Forming and Injection Molding process chains.
ATOS in Injection Molding
10/2011 Mobile measuring without limits - Optical Metrology in Injection Molding
Order your free ticket to visit GOM at Fakuma 2011
09/2011 Find out more how optical 3D metrology speeds up first article inspection, supports targeted tool correction and shortens product lead times within plastic and in injection molding process chains.
Robtec Technology Seminar 2011
Robtec Technology Seminar 2011
09/2011 On August 25, the Robtec Technology Seminar 2011 took place in Sao Paulo, Brazil. More than 400 participants from industry and research shared experiences about the use of optical metrology in Brazil.
Visit GOM on EMO 2011 - Hall 5 Booth G79
EMO 2011
08/2011 Order a free admission ticket and find out more about the whole range of our state-of-the-art sensor technology, efficient measuring and inspection software and tailor-made 3D metrology solutions.
MCAE Seminar 2011: GOM Inspect and ATOS Triple Scan
08/2011 "GOM Inspect is more than just a Viewer ..." - "New developments of the GOM 3D scanners ". These two topics introduced the GOM seminar which took place at MCAE in Kurim on in the middle of June 2011.
Video tutorials for GOM Inspect now available in Chinese
GOM Inspect Video Tutorials in Chinese
07/2011 The new language version is one in an ongoing series of additions to our range of video tutorials for GOM Inspect. Alongside the videos in German and English, a Chinese version is now also available.
Free Workshop CD - 3D Metrology in the Plastic and Injection Molding Industry 2011
07/2011 Companies such as Braun, BJB and Faurecia Interior Systems use GOM optical metrology systems to accelerate their processes and improve the quality of their components. Order your free copy of the GOM workshop CD, which contains all the presentations held at the workshop.
Industrial 3D Metrology in Plastic and Injection Molding Process Chains 2011
GOM Workshop
06/2011 This workshop offers injection molding experts from R&D, design, tooling & molding, quality control and manufacturing departments insights how optical 3D metrology speeds up first article inspection, supports targeted tool correction and shortens product lead times
Trilion User Meeting 2011 in Philadelphia, USA
05/2011 Trilion User Meeting in Philadelphia with additional customer training workshop
New video tutorials for GOM Inspect. Now also available in German.
04/2011 New videos have been added to our range of tutorials for GOM Inspect.
Parametric Inspection on Control 2011
04/2011 Experience the new mile stones in Optical 3D-Metrology: With ATOS Triple Scan 3D-Digitizer and GOM Inspect Professional you can now profit from both, faster and traceable quality control
GOM-ARGON Workshop: Optische meettechnieken in Industriële Processen 04-2011
GOM-ARGON Workshop
04/2011 This workshop offers you insights in the advantages of optical 3D measuring techniques in industrial process chains.
Automated Optical Metrology at A&T fair in Turin
04/2011 GOM Italia presents an inspection cell to measure a sheet metal body with the new ATOS Triple Scan digitizer during A&T Turin
National Premiere at MECSPE fair 2011 in Parma
Logo MECSPE 2011
03/2011 GOM Italia presents new mobile 3D scanner ATOS Triple Scan and free inspection software
GOM-ARGON Workshop: Optische meettechnieken in Industriële Processen
GOM-ARGON Workshop
03/2011 De GOM Benelux-ARGON workshop focust op het inzetten van optische 3D coördinatenmeettechniek in ­industriële processen.
GOM Inspect Video tutorials now available
GOM Inspect Video Tutorials
03/2011 GOM offers video tutorials and comprehensive user support for GOM Inspect
GOM is now on Twitter
GOM is now on Twitter
03/2011 GOM is now using the popular microblogging service Twitter
Free GOM Inspect Software, a download success
GOM Inspect
02/2011 GOM Inspect Introduction Seminars in Germany and Sweden
GOM Forum available for all GOM Software packages
GOM Forum opened
01/2011 Discuss issues, quickly find solutions and exchange experiences with software users.
BMW sheet metal production monitored with ATOS Inspection Cell
Automated Robot Inspection Cell
01/2011 The press shop at BMW's Dingolfing plant relies on optical metrology systems including automation and standardization for inspection of sheet metal components.
Zalig Kerstfeest
Merry Christmas
12/2010 Wij wensen U een zalig kerstfeesten een gelukkig nieuwjaar.
GOM presents new industrial 3D Scanner ATOS Triple Scan
12/2010 World Premiere at Euromold 2010
GOM Optical Metrology Conference in China
11/2010 The 11th GOM Optical Metrology Conference in China was held in the Haiyatt Garden Hotel in Chang An, Dongguan City, November 25 to 27, 2010.
Industriële 3D meettechniek
Contact
Nieuwsbrief

De gratis nieuwsbrief van GOM levert het laatste nieuws over GOM en hun oplossingen voor optische metrologie.

AANMELDEN

Sociale media

Neem contact met ons op voor nieuws, events, trends en carrières.

ContactSupportImpressumPrivacySitemapCookie Settings