Nieuws Historiek

Application Webinar - Shear Test

03/2016 Optical metrology can support new material developments and quality assurance by providing precise full-field results of shear angles by non-contact measurements. On April 13, 2016, GOM invites you to the webinar "Shear Test".

GOM at Control 2016

03/2016 From April 26 to 29, 2016, GOM will be showing the complete GOM product family with a special focus on precise automated inspection – including the ATOS ScanBox Series 7 and 8 – at the leading international trade fair for quality assurance in Stuttgart.

GOM France Road Shows 2016

03/2016 In a series of road shows, GOM France is presenting the newest developments in 3D metrology and inspection software. The road shows are hosted in collaboration with the IUTs Aix-en-Provence and Nantes.

GOM Inspect Introduction Seminar – Additional Date in April 2016

03/2016 Due to the high demand, the GOM Inspect Introduction Seminars are already fully booked in March, both in Braunschweig and Göppingen. Therefore, GOM offers an additional training course on April 18, 2016 in Braunschweig, Germany.

More than 200 participants at the GOM Testing Roadshow

03/2016 The experts talk at the GOM Testing Roadshow “New Measurement Technology for Materials and Components Testing” showed that optical measuring systems replace traditional methods, such as strain gauges, accelerometers, transducers or extensometers.

GOM Italia awaits you at MECSPE 2016

03/2016 On the occasion of the industrial fair MECSPE in Parma, scheduled from 17th to 19th March 2016, GOM Italia is pleased to present latest innovations in optical 3D metrology including ATOS ScanBox 5120 and 4105.

Presentazione Nuova versione del Software V8 SR1 a GOM Italia

02/2016 La nuova release del software GOM V8 SR1, offre la possibilità di conoscere le numerose nuove funzionalità nell'ambito delle misurazioni. L'evento e' totalmente gratuito e prevede il pranzo.

Webinar - Automotive Testing

02/2016 GOM invites you to a webinar which will discuss applications from the automotive industry in the areas of stiffness- and crash testing, motion analysis and the evaluation of thermal deformation of components tested in climate chambers.

GOM 3D Testing Day in the United Kingdom

02/2016 GOM UK will be presenting new ARAMIS hardware and software as well as the free GOM Correlate software. Join us for technical lectures and live workshops.

01/2016 GOM Correlate is the evaluation software for 3D testing supporting both digital image correlation (DIC) as well as 3D motion analysis. The software allows the analysis of displacement and strain and delivers detailed reports with diagrams and videos.

Webinar – Customizable Checks

01/2016 GOM is continuing the webinar series on the new functional highlights of the V8 SR1 software offering a further webinar with the topic "Customizable Checks" on February 17, 2016, at 9:00 a.m. CET or 5:00 p.m. CET.

New Software from GOM - V8 SR1

01/2016 The new GOM software is available now. This version offers a large range of functional improvements and innovations for 3D measurements, 3D inspections and automated measuring procedures.

GOM Testing Roadshow

01/2016 In a series of technical lectures and live workshops, GOM will be presenting new product models, the ARAMIS 3D Camera, functions of the GOM Testing Controller as well as image acquisition and evaluation features.

Marubeni organized GOM Conference in Japan

01/2016 GOM’s partner Marubeni organized a GOM Conference with approximately 300 visitors in Tokyo and Nagoya in November. Participants had the opportunity to take part in user presentations and live demonstrations to discover how GOM’s optical measuring techniques simplify complex measuring tasks in the field of 3D coordinate measuring technology as well as in materials and component testing.

New Software Release from GOM: V8 SR1

01/2016 The new GOM software is available starting mid-January 2016. The new version offers a large range of functional improvements and innovations for 3D measurements, 3D inspections and automated measuring procedures.

Wij wensen U een zalig kerstfeesten een gelukkig nieuwjaar.

12/2015 Wij wensen u en uw familie vredige kerstdagen en een succesvol 2016.

The European Space Agency uses ARAMIS for precise material determination

12/2015 ARAMIS is used by the ESA to help space exploration to reach new limits. The measuring system detects material and component deformations as well as material degradations resulting of high temperature fluctuation or heavy load.

DOM 3D Shows GOM Measuring Techniques for Materials and Component Testing

12/2015 The GOM partner DOM 3D organized a user meeting under the theme "4th Forum on Advanced Optical Testing" from November 5 - 6 in Shanghai, China. About 150 guests accepted the invitation to the Z-art Center and learned during user presentations and live demonstrations how to implement optical metrology from GOM in production processes, development and quality assurance.

GOM Inspect Introduction Seminars – Dates 2016

12/2015 In the upcoming year, GOM will offer again the GOM Inspect Introduction Seminars at two locations in Germany. Users from the fields RP, CAD/CAM, CAE and CAQ will get to know how to use the software for inspection and mesh processing of 3D measuring data.

Impressions of GOM Conference 2015 on YouTube

12/2015 The film about the four GOM 3D Metrology Conference days shows impressions of the conference program with speakers from renowned companies such as ESA, Volkswagen, SRAM, Pratt & Whitney and DTU Denmark. The video also gives an insight into the accompanying technical exhibition.

Opel Uses ATOS ScanBox within the Engine Production

11/2015 Opel integrates optical metrology in its automated engine production. In a video, you can learn how the ATOS ScanBox helps Opel to improve quality assurance and workflows of engine production at its site in Kaiserslautern, Germany.

12 Novembre 2015, Zingonia (BG) - Workshop GOM sullo stampaggio plastica

10/2015 Assolute novità di questa edizione sono l’allestimento di “isole” tecnologiche in cui assistere divisi in piccoli gruppi al funzionamento dei sistemi in tempo reale e una nuova location: CESAP - Centro Europeo Sviluppo Applicazioni Plastiche a Verdellino/Zingonia (BG).

Webinars – New Functionalities for GOM V8 SR1 Software

10/2015 In the field of 3D metrology, the new GOM V8 SR1 software provides an extended range of functions and enhancements for ATOS, GOM Inspect, GOM Scan, TRITOP and PONTOS Live. GOM is running a series of webinars to give you an introduction to the new software functionalities.

GOM Software V8 SR1 Beta

10/2015 GOM is pleased to announce the new V8 SR1 Software solution.

GOM Conference 2015 Shows Latest Developments of Optical 3D Metrology

10/2015 With more than 650 visitors from more than 45 countries, the GOM Conference proved again to be an established forum for experts in metrology, quality control and product development.

GOM Training Courses Online at https://www.gom.com

10/2015 The comprehensive range of training courses addresses beginners and experts. System and software training courses combine theoretical knowledge with deepening hands-on exercises.

GOM 3D Metrology Conference 2015

09/2015 The GOM Conference from 21st to 24th September 2015 shows in user presentations and live demonstrations, how optical measuring systems shorten development cycles and improve production processes.

Webinar: Characterizing Materials and Validating FEA

09/2015 Our partner Trilion is holding a webinar "The Ultimate Tool for Characterizing Materials during Mechanical Tests and Validating FEA during Component Tests" on September 23, 2015, 14:00 ET

GOM Conference - Updated program available

09/2015 The updated program for this year’s GOM Conference is now available.

GOM Inspect Introduction Seminar - Additional Date in 2015 at the Göppingen Training Center

08/2015 Due to the high demand for GOM Inspect Introduction Seminars, GOM is offering an additional session to be held on 26th November 2015 in Göppingen, Germany. During the one-day seminar, users learn how to use the software efficiently for their particular measuring tasks.

GOM Workshops – Automated 3D Non-Contact Measurement

08/2015 GOM France is organizing a series of workshops covering possible automated 3D non-contact measuring applications in October, November, and December 2015.

GOM's ATOS Compact Scan was used to measure “Alchemy” by Jackson Pollock

08/2015 The results of the digitization of the famous painting have then been used to create a physical reproduction for the exposition "ALCHEMY BY JACKSON POLLOCK. Discovering the Artist at Work" (Peggy Guggenheim Collection, Venice).

Summer closure GOM Italia

07/2015 GOM Italia office will be closed for summer holidays from August 10th to August 21st, 2015 (incl.).

ARAMIS - Measuring the Movement

07/2015 adidas developed its latest running shoe – Ultra Boost – by using optical measurement technology from GOM. Find out in a video, how adidas uses the ARAMIS system for optical deformation analysis in a running test in order to determine strain results.

Conference in Shanghai – GOM Product Developments in the Automotive Industry

07/2015 On May 28, 2015, our Shanghai-based subsidiary organized a conference on the “New Challenges in Global Automotive Quality”, stressing the impact of optical metrology on the automotive sector.

GOM Conference 2015 - Preliminary Program available

06/2015 Speakers from well-known companies such as ThyssenKrupp, adidas, ETH Zurich, Brose und Škoda will share their first-hand experiences using optical metrology systems at the GOM Conference. The preliminary program is now available.

3D Metrology in Sheet Metal Forming Process Chains

06/2015 In order to fulfill increasing quality demands as well as high cost and time pressure, the sheet metal industry relies on optical measurement systems. This is what the exchange of experts revealed at the GOM Workshop Sheet Metal Forming.

Application Webinar - High Speed Component Testing

05/2015 High speed tests are an important tool of today’s product development, as they enable the analysis of components’ reaction to impact events or crashes. Join the webinar on June 24th, 2015 at 09:00 CEST or 18:00 CEST to hear more about the use of optical metrology in high speed component testing.

Life Cycle of Running Blades Calculated with 3D Measuring Data

05/2015 In order to exactly calculate the life cycle of running blades, researchers of the University of Paderborn, Germany, examined the durability of these prostheses. During load testing, optical measuring systems were used.

GOM Inspect Introduction Seminar - Additional Date in July 2015

05/2015 Due to the high demand for GOM Inspect Introduction Seminars in the first half of 2015, GOM is expanding the current schedule by offering an additional session to be held on 6 July 2015 in Braunschweig, Germany.

First GPS Training (GD&T) – Dates in May and October

05/2015 GOM and dim GmbH are pleased to jointly offer their first GPS Training (GD&T) in Braunschweig, Germany. Due to the limited number of participants, we recommend to register as quickly as possible.

MCAE User Meeting – Trends in Optical 3D Metrology

04/2015 Some 100 professional technicians from prominent industries and institutions came together at a joint GOM user meeting that took place at Hotel Atlantis at Brno Dam and at MCAE’s headquarters in Kuřim on March 4 and 5, 2015.

GOM Workshop Sheet Metal Forming on May 20, 2015 in Germany

04/2015 Well-known companies – among them Volkswagen, Salzgitter Mannesmann Forschung and Wolf Werkzeuge – will share their experiences and show how 3D measuring systems are used in sheet metal forming process chains for consistent quality assurance.

Precise Industrial 3D Metrology Solutions at the Moulding Expo 2015

04/2015 At the Moulding Expo 2015, GOM will be presenting the newest developments in optical metrology and state-of-the-art hardware and software solutions. Order your free ticket now and visit us in Hall 4, Booth 4E22.

GOM at Control 2015 - Order your free ticket

04/2015 GOM presents the complete range of its industrial sensor technology and its efficient measuring and inspection software. Order your free ticket now and visit us at Control 2015.

GOM at Affidabilità & Tecnologie 2015

03/2015 GOM Italy is pleased to introduce the new V8 version of the software GOM Inspect and GOM Inspect Professional at Affidabilità & Tecnologie 2015 in Turin from april 22-23.

GOM Italia vi aspetta a MECSPE 2015

03/2015 In occasione della fiera MECSPE di Parma in programma dal 26 al 28 marzo 2015, GOM Italia è lieta di presentare le sue ultime novità nel campo della metrologia ottica 3D tra le quali l'ATOS ScanBox 5120, e la nuova versione V8 del software PONTOS Live.

Evénements GOM France - Juin 2015

03/2015 En juin 2015, vous aurez la possibilité de découvrir les technologies GOM intégrées dans différents process industriels. Les 9 & 10 juin, l'ENSAM Metz vous accueille pour un workshop "Fonderie, Forge, Emboutissage". Les 23 & 24 juin, c'est avec la société VECTEO que GOM a travaillé en partenariat pour vous proposer une journée technique sur 'l'automatisation de la mesure 3D', à l'IUT du Creusot.

3D Conference in Korea Presented the Latest Developments in Optical Metrology

03/2015 OMA, our partner in Korea, organized a two-day 3D Conference held in Daejeon on 11th and 12th December, 2014. Some 140 participants came to Chungnam National University to discuss the latest developments in GOM technologies.

Additional Venue for GOM Inspect Introduction Seminars

03/2015 Due to the large number of participants attending the GOM Inspect Introduction Seminars in Braunschweig, we are pleased to announce that this training can now be offered at a second location in Southern Germany.

1
2
3
4
5
6
7