The GOM CT digitizes complex parts including the internal geometries at the finest level of detail. You get a complete 3D image for GD&T analyses or nominal-actual comparisons. The metrology CT particularly excels in digitizing small plastic and light metal parts.
thanks to a 3k X-ray detector (3008 x 2512 pixels)
due to mathematical modelling of the measuring room
via 5-axis kinematics and live view in the software
for a consistent, fast workflow
When digitizing a part, the GOM CT achieves an outstanding sharpness of detail: On the one hand, because it uses a high-resolution 3k X-ray detector for acquiring measuring data and on the other hand, because each part is measured in the best possible measurement position and thus always in the highest possible resolution. You can see the result below: on the left, measuring data generated with the GOM CT and on the right the usual standard.
The GOM CT generates high-resolution measuring data that show every detail: The pictured part (total diameter: 1 cm) was taken out of an in-ear handphone and digitized with GOM CT. The diameter of a single grid element is 0.1 mm.
For producing its precise 3D measuring data, GOM CT applies mathematical intelligence: It combines perfectly interconnected algorithms throughout the measuring sequence with digital modelling of the measuring room. Additionally, the system features optimized mechanical stability of all components that are relevant for performing the measurement. The bottom line: Based on the measuring results, you can evaluate a part’s quality in a truly reliable, highly precise way and conduct further analysis.
A 5-axis kinematics with integrated centering table helps you to optimally position the part in the measuring volume. You simply place it in the machine’s measuring room – the rest is done by the software.
The control of the device and the metrological evaluation of the data are combined in a single software package, making additional software or intermediate steps redundant. The process chain from the recording of the raw data through the inspection up to the creation of a measuring report is significantly simplified.
|X-ray source||225 kV|
|X-ray detector||resolution: 3008 x 2512 pixels|
|Measuring area||Ø 240 mm h: 400 mm|
|Voxel size||2 µm – 80 µm|
|Fields of application||first article inspection, tool correction, inspection during ongoing production|
|Inspection features||interal structures, wall thickness, material defects, pores and shrinkage cavities|
|Measurement tasks||GD&T analysis, nominal-actual comparison, assembly analysis|