Industriële 3D meettechniek
ATOS Triple Scan
ATOS Compact Scan
ATOS ScanBox Series 4
ATOS ScanBox Series 5
ATOS ScanBox Series 6
ATOS ScanBox Series 7
ATOS ScanBox Series 8
ARAMIS 3D Camera
ATOS for Education
ARAMIS for Education
GOM Education Award
GOM System Software
Virtual Measuring Room
Open Data Formats
Materials Testing & Simulation
Press and Body Shop
Test Stands & Component Testing
Fuselage & Cabin
Gas- & Steamturbines
Sheet Metal Forming
FEA / Simulation Verification
Sheet Metal Parts
Automated Quality Control
Casting and Foundry
P&C Automotive: Efficient Production Thanks to 3D Metrology
The European group of companies optimizes its production processes using the ATOS Triple Scan system and benefits from competitive advantages due to shortened development times.
German automotive supplier GEDIA relies on automated quality control
GEDIA’s new approach to quality control: The company is replacing tactile systems with full-surface optical 3D coordinate measurement. The new technology is also used for automated quality control.
Automotive Testing: Optical 3D Metrology improves Safety and Comfort
To speed up design and simulation, the automotive industry relies on optical measuring systems. Applications include crash and impact tests as well as climate chamber, wind tunnel and fatigue testing.
Fewer Loops for Better Tools
Following a benchmark analysis, the Franconian (Germany) plastics specialist, Oechsler, uses ATOS Triple Scan in order to accelerate the production process of injection molding tools.
Liebherr-Aerospace uses ARAMIS for landing gear testing
The company uses ARAMIS for structural testing on landing gear components. As a result, Liebherr is able to determine part deformations and reduce testing times.
Automated Quality Assurance with ATOS ScanBox 7260
The introduction of the ATOS ScanBox 7260 represents the next step in OPEL's restructuring of its measuring procedures, thus reducing the inspections by 80% in its press shop in Rüsselsheim, Germany.
ATOS supports aeronautical research at DLR
To make aircrafts more fuel-efficient and environmentally friendly, DLR in Braunschweig integrates optical measuring systems into its research of new technologies.
Researchers calculate Life Cycle of Running Blades with 3D Measuring Data
In order to calculate the life cycle of running blades, the University of Paderborn, Germany examined the durability of these prostheses. During load testing optical measuring systems were used.
Non-Contact Measuring Systems Support Certification of Airbus A350
For the load, fatigue and damage tolerance tests of the A350 winglet, Airbus supplier FACC for the first time fully integrated non-contact measuring systems from GOM in the test setup.
Quality assurance of plastic parts with optical 3D metrology
Braun, the manufacturer of electrical bodycare appliances in Germany, introduced optical measuring systems to its quality assurance process. The systems have made new inspection practices possible.
Optical Metrology supports the Building of full-scale Helicopter Mock-ups
To support the training of maintenance crews for military helicopters under real-world conditions, Reiser Systemtechnik uses optical 3D metrology when building full-scale helicopter training rigs.
US foundry Bradken implements optical measuring technology
Quality control of castings with tactile measuring systems has its limitations. Therefore, US steel foundry Bradken has implemented optical 3D metrology. This enables inspection processes to be accelerated.
Optical 3D measurements providing benefits to foundry processes
3D shape and dimensional analyses provide reliable information for quality control and process optimization. Foundries and forging shops use the ATOS 3D digitizer for shape and dimensional control of patterns, sand cores and castings.
Mobile measuring without limits - Optical Metrology in Injection Molding
In recent years, the complexity of parts in the plastics processing industry has increased, generating high demand for the development and use of new metrology procedures to optimize the complete process chain in industrial environments.
Automated Robot Inspection Cell for Quality Control on Sheet Metal Components
The press shop at BMW's Dingolfing plant relies on optical metrology systems including automation and standardization for inspection of sheet metal components.
Online Deformation Measurement of Metal Forming Machines
Dynamic 3D analysis of machine tools analyzes machine capability and extends tool life.
Optical CMM Shortens Downtime in Shipbuilding from Months to Days
GOM's TRITOP mobile optical 3D coordinate measurement system helps to reduce the down-time of ships in dry docks from months to just days.
From Clay Model to Class A Surfaces
EDAG employs 3D digitizer for reverse engineering to turn ideas into products faster.
Portable CMM for Process Optimization on the Production Line
Using optical metrology reduces rework time and cuts production costs.
Quality Control of Offshore Wind Power Units
The use of mobile optical coordinate measuring systems guarantees smooth assembly of offshore wind power units
Inspection of Plastic Parts
3D coordinate measuring for quick form and dimension inspection, warpage & shrinkage analysis, material thickness inspection, and geometric dimensioning and tolerancing.
3D Deformation Determination of Tire Surfaces in Extreme Driving Conditions
3D deformation measurement improves rolling resistance and riding comfort in the development of new tires.
Analysis of Sheet Metal Specimens in Bulge Tests
Improved determination of yield stress for sheet metal materials.
Determination of the Process Limitations in Sheet Metal Forming (FLC, FLD)
Knowledge of precise material quality helps R&D departments achieve shorter development times and fewer try-out iterations, at the same time guaranteeing product safety.
Quality Assurance in Turbine Manufacturing
Quality Control, Efficiency Analysis and Efficiency Optimization on Turbines
Quality Control in Train Wagon Building
GOM's portable TRITOP system speeds up inspection of body-in-white and bogies in railway engineering.
Failure Analysis for Riveted Joint
Online 3D strain measurement helps visualize the behavior of bonding technologies in lightweight constructions.
Verification of Numerical Calculations of Buckling Behavior
At DLR optical high-speed 3D strain sensors check for buckling in a thin-walled CFRP cylindrical structure under axial compression, torsion and internal pressure.
Optimization of Metal Forming Tools during Tool Try-Out
GOM's ARGUS system speeds up optimization of the forming process while checking part safety at the same time.
Optical Measuring Tools in Stamping Applications
Salzgitter AG measures and visualizes the quality and status of the stamping process on sheet metal with the ARGUS system.
Determination of Material Behavior in Tensile Tests
ARAMIS detects flow behaviour of sheet metal material in high speed tensile test.
Deformation Analysis of Car Components
TRITOP photogrammetric system determines the interactions between body, attached parts and the interior such as changes in gap-width and global warpage of parts of the car body.
Optical metrology supports process optimization at WESO
By means of optical metrology, the foundry WESO manages to guarantee the quality of cast parts and to optimize the entire production process.
Sheet Metal Forming
Casting and Foundry
Industriële 3D meettechniek