GOM Metrology

GOM Metrology

Topics

Topics

Sheet Metal Forming

With the aid of optical metrology, the sheet metal forming process is used for quality assurance in various industrial sectors.

Read more ›

Deep drawing

With the aid of optical metroloy, the deep drawing process is used for quality assurance in various industrial sectors.

Read more ›

Hot forming

With the aid of optical metrology, the hot forming process is used for quality assurance in various industrial sectors.

Read more ›

Cold forming

With the aid of optical metrology, the cold forming process is used for quality assurance in various industrial sectors.

Read more ›

Tensile Test

With the aid of optical metrology, the tensile test method is used for quality assurance in various industrial sectors.

Read more ›

Nondestructive Testing

With the aid of optical metrology, nondestructive material testing is used for quality assurance in industrial areas.

Read more ›

Bend test

With the aid of optical metrology, the tensile test method is used for quality assurance in various industrial sectors.

Read more ›

Coaxiality

Adhering to positional tolerances such as coaxiality is necessary for rotating components to run smoothly.

Read more ›

Concentricity

Concentricity is part of coaxiality. While the check of coaxiality includes the axes, the check of concentricity only includes the center point. These checks usually happen several times on a part.

Read more ›

Tactile and optical measurement technology

We show the advantages, differences and application areas of tactile and optical measuring methods.

Read more ›

FEM-Simulation

The finite element method is a based on numerical analyses helps to manufacture durable and highly resilient products. This also ensures optimal operational safety.

Read more ›

Wöhler fatigue test

In the Wöhler fatigue test, optical 3D measurement technology enhances deformation analysis and helps calculate the fatigue endurance limit and finite-life fatigue strength.

Read more ›

Triangulation

Triangulation is the foundation principle for various measuring procedures: Laser triangulation and fringe projection explained simply.

Read more ›

Surface inspection

The surface inspection allows shells of objects to be visually checked. The process is used in industry for quality assurance.

Read more ›

Elongation measurement

Materials can deform under thermal and mechanical effects. An example of such a change in shape is elongation.

Read more ›

Edit 3D files

Three-dimensional objects are virtually mapped in a 3D file. It forms the basis for further processing for 3D printing.

Read more ›

Reverse engineering - surface reconstruction

Generation of CAD data from a volume model of a 3D scan for part and tool design.

Read more ›

DIC: motion and deformation analysis

The DIC measurement helps to determine 3D displacements and surface strains, 3D velocities and 3D accelerations.

Read more ›

Forming limit curve (FLC)

The forming limit curve describes the maximum formability of sheet metal materials. It is used as a basis for forming analyses.

Read more ›

Digital Assembly

Digital assembly enables optimum quality control during the simulated, digital mounting of components.

Read more ›

ARAMIS Multisensor DIC Systems

The combination of several ARAMIS sensors or ARAMIS measuring systems are called multisensor systems. Multisensor systems allow time-synchronized measurements from different perspectives that can be evaluated in a common coordinate system.

Read more ›

Material testing and component testing

Material testing and component testing are two tfields in the world of mechanical, thermal or chemical testing. During material testing, the behavior and material parameters of material samples are determined.

Read more ›

ARAMIS High-Speed DIC Systems

DIC is the abbreviation for digital image correlation. The method is based on principles of the close-range photogrammetry, i.e., images or videos are used for measuring purposes. The use of cameras enables non-contact measurements. With the help of digital image correlation, you can measure strains, displacements, velocities, accelerations and rotations, among others.

Read more ›

Warpage on injection-molded parts

Reasons for warpage, influencing factors and possible solutions to evaluate warpage on plastic parts in metrology correctly.

View more ›

5 reasons to go optical in 3D testing

Non-contact optical measurement technology for analyzing deformation and studying motion in 3D saves time and money.

Read more ›

Civil Engineering

In our modern world, civil engineering, or its services, is all around us. We use roads and bridges to get from A to point B. We live in buildings, travel to the closest airport via an excellent rail network, always have fresh drinking water at our disposal and do not give a second thought to water disposal, which works so naturally that we hardly notice it anymore. All these achievements of civilization are based on the creativity and expertise of civil engineers.

Read more ›