GOM Metrology

GOM Metrology

Analysis of microswitches with computed tomography and GOM Volume Inspect

Analysis of microswitches with computed tomography and GOM Volume Inspect

ODW-ELEKTRIK is an innovative development partner and supplier of high-quality cabling, solenoids and mechatronic systems. Bernd Föller, who heads the measuring laboratory for ODW-ELEKTRIK, reports from practice.

GOM Volume Inspect Pro chez ODW-ELEKTRIK

“We supply microswitches...

to first-tier suppliers in the automotive industry, for example. These switches are an enormous challenge from a metrological point of view: The plastic is heavily fissured with countless small elements inside. A full nondestructive inspection of these parts is possible with computed tomography only.

We use a ZEISS METROTOM 800 130 kV computed tomography system to X-ray these switches. With only one X-ray image, we get all the data we need for a component analysis. The evaluation is increasingly carried out in the GOM Volume Inspect software.

Leading in freeform surfaces

From my point of view, compared to other CT software packages GOM Volume Inspect is  the leader in the measurement of freeform surfaces. Since introducing the software at ODW-ELEKTRIK, we have been able to precisely analyze the surface profile, for example of very small radii, during GD&T inspection and perform a tolerance comparison (nominal-actual comparison). Elements that were previously unmeasurable can now be analyzed and measured in a simpler way.

3D shrinkage cavity evaluation in accordance with P203

Another major advantage is the 3D shrinkage cavity evaluation in accordance with reference sheet P203 that is integrated into the software. I am sure that this advanced way of displaying quality will become more and more important in the future. This means that we are already equipped for the requirements of tomorrow. 
I also want to emphasize the valuable and uncomplicated exchange with the CT software experts from GOM. Our contact persons manage to find solutions to our metrological questions in an impressively short time, even though our components are highly complex and not common.

The right software makes the difference

Because we had such good experiences with GOM Volume Inspect here in Germany, we will start using the software at our plants in Hungary and Ukraine this year. After all, the right software makes all the difference in component testing and measurement.”

ZEISS INSPECT X-Ray

CT data analysis with maximum efficiency: GOM Volume Inspect Pro offers automatable evaluations and individually programmable functions.

MORE

About ODW-ELEKTRIK

ODW-ELEKTRIK is an innovative development partner and supplier of high-quality cabling, solenoids and mechatronic systems. Today, the company develops and manufactures products of the highest quality with more than 2,500 employees at five sites (Germany, Hungary, Ukraine, Macedonia, Mexico). ODW-ELEKTRIK thus offers optimum conditions for meeting the high expectations of its customers.

www.odw-elektrik.com