Press and Body Shop

Quality management and assurance are steadily gaining importance in industrial development and manufacturing. Decentralized component production by suppliers means that tight specifications have to be met in order to guarantee problem-free final assembly and produce a high-quality product. The ATOS optical digitizing system from GOM is tried and proven in the inspection of metal sheets as well as body-in-white analysis.

With the sensor and software all developed in-house, GOM has created a comprehensive solution and secure workflow for the sheet metal inspection process, enabling surface and sharp-edged features to be verified with one system.

Complete Sheet Metal Part Inspection

The ATOS optical 3D digitizer captures the surface geometry of an entire component on the basis of a high-resolution point cloud. Additionally, sharp-edged features can be measured with subpixel precision using algorithms developed specially for this purpose. This comprehensive concept makes it possible to verify the complete surface as well as hole patterns, trim and spring-back, tornado lines, gap & flush, and other typical sheet metal features. Thanks to the concept of "teaching by doing" and inspection planning based on CAD data in the GOM Inspect Professional Software, multiple part inspection can be automated as of the second part.

ATOS brings together high-quality measured data and flexibility, so that it can be used not only in measuring rooms but also in pressing plants and raw production environments. Regardless of object size, ATOS creates precise 3D coordinates and delivers complete measuring and inspection reports.

Automated Quality Control

Industrial production processes require automated measuring cells to enable higher throughput (more parts in less time, better planning) and higher repeatability (process safety). As a single-source provider of industrial measuring sensors and parametric inspection software, GOM's automation team opens the way to standardized and centralized part inspection management with parametric and traceable inspection workflows.

Gages, Jigs and Fixtures

Stable parts can be measured without jigs or fixtures using the contact-free ATOS Digitizer, because the alignment of measured data to CAD data is controlled using RPS points in the GOM inspection software. If a sheet metal component is digitized when free standing and once installed, deformations can be measured and visualized. Variable alignment is possible due to the dense data volume, and contributes to fast problem resolution during sheet metal assembly analysis. For the measurement of clamped sheet metal components, the contact-free measuring techniques enable an adaptive fixture concept, thus saving costly gauges. For example, a simple holding jig can replace six measuring gages. Since it can be used in parallel for various parts, storage space and production time are saved.

Jointing Technology: Gluing, Riveting, Welding

Jointing technology plays a significant role in body-in-white production. GOM's ARAMIS and PONTOS sensors are also used to test and analyze joining and bonding methods such as:

  • Tensile test on rivet joints
  • Tensile test on welded joints
  • Shear test on glued joints

GOM's systems improve simulation models for CAE (Computer Aided Engineering) in order to optimize the final product's crash behavior.

Read more about practical application:

The automotive supplier uses the ATOS Triple Scan system for process-encompassing and automated quality management.
Read PDF
The European group of companies optimizes its production processes using the ATOS Triple Scan system and benefits from competitive advantages due to shortened development times.
Read PDF
Dzięki oprogramowaniu GOM Inspect Professional firma BJB skróciła proces wprowadzania narzędzi z trzech lub czterech tygodni do trzech lub czterech dni.
Read PDF
The introduction of the ATOS ScanBox 7260 represents the next step in OPEL's restructuring of its measuring procedures, thus reducing the inspections by 80% in its press shop in Rüsselsheim, Germany.
Read PDF
In order to speed up tool try-out during the manufacture of complex sheet metal parts, the Bernecker Group has combined a CAD/CAM solution with a simulation software and optical metrology.
Read PDF
GEDIA’s new approach to quality control: The company is replacing tactile systems with full-surface optical 3D coordinate measurement. The new technology is also used for automated quality control.
Read PDF
The press shop at BMW's Dingolfing plant relies on optical metrology systems including automation and standardization for inspection of sheet metal components.
Read PDF
Fast inspection of geometry, hole pattern, trim and spring on sheet metal parts.
Read PDF
GOM´s mobile coordinate measuring systems support calibration of fixtures, jigs and gauges.
Read PDF
Find out more about GOM's advanced concept for robot cells, virtual measuring room and trend analysis.
Read more
GOM's optical analysis systems work hand-in-hand to manage key processes such as material analysis and simulation, tool-making, try-out and production control for the sheet metal forming industry.
Read more