Industriële 3D meettechniek
ATOS Triple Scan
ATOS Compact Scan
ATOS ScanBox Series 4
ATOS ScanBox Series 5
ATOS ScanBox Series 6
ATOS ScanBox Series 7
ATOS ScanBox Series 8
ATOS for Education
ARAMIS for Education
GOM Education Award
GOM System Software
Virtual Measuring Room
Open Data Formats
Material Testing & Simulation
Press and Body Shop
Test Stands & Component Testing
Fuselage & Cabin
Gas- & Steamturbines
Sheet Metal Forming
FEA / Simulation Verification
Sheet Metal Parts
Automated Quality Control
At the moment there are no upcoming webinars. New dates are in preparation.
Webinar - Automated Creation of Measurement Plans - 3D Master
The webinar on October 18, 2017, shows how to import inspection features that already exist within a CAD model into GOM Inspect Professional 2017.
Training Webinar - Surface Analysis of Sheet Metal Parts
Optical metrology allows a series-accompanying and reproducible evaluation of surface defects. Register for the webinar on July 13, 2017, and find out how to detect and analyze defects on sheet metal parts.
Training Webinar - Open Data Architecture in the 3D Testing Software
The webinar on June 29, 2017, presents the import of additional scalar values and the export functions in ARAMIS Professional 2017 and GOM Correlate Professional 2017. Possibilities for live communication are also presented.
Application Webinar - Determination of Forming Limit Curves in ARAMIS
The forming limit curve provides an established guideline for practitioners who are working in the field of sheet metal forming applications. The application webinar takes place on May 24, 2017, in English and German.
Training Webinar - 2D/3D Image Correlation in Materials and Components Testing
Displacements, strains and specified parameters of materials are captured with mono and stereo camera systems. Which differences are related to both optical measuring systems is shown in the webinar on March 30, 2017.
Application Webinar - Optical 3D Metrology in Biomechanics Testing
Biomechanics presents a huge challenge to measurement technologies for determining mechanical properties of materials and for validating the performance of parts. The webinar on March 15, 2017, deals with applications for optical 3D metrology in the field of biomechanical testing.
Training Webinar - A Beginner’s Guide to GD&T
GD&T is today widely used in most industries around the globe. GOM is going to break down the fundamentals of GD&T workflows into easily understandable concepts. The training webinar takes place on December 15, 2016, in English and German.
Training Webinar - Surface Analysis on Plastic Components
Besides geometrical and functional requirements, visible surfaces play also a critical role as they directly represent the product quality. The training webinar takes place on October 27, 2016, in English and German.
Training Webinar - New GOM Software 2016 - 3D Testing
The new GOM Software 2016 provides a wide range of new innovative functions and enhancements in the field of 3D testing. The webinar will take place on June 16, 2016 in English and German.
Training Webinar - 2D Motion Analysis with GOM Correlate
GOM Correlate provides free 2D analysis of reference point markers based on any digital image series or video file. The training webinar will take place on June 8, 2016 in English and German.
Training Webinar - New GOM Software 2016 - VMR
The new GOM Software 2016 provides a wide range of new innovative functions and enhancements in the field of virtual measuring room (VMR). To make you familiar with the new software features that can be helpful for your daily work, join the webinar on June 1, 2016.
Application Webinar - Optical 3D Metrology in Tensile Testing
The determination of material parameters based on tensile tests is widely used for new material developments and material quality control. Register now for the webinar on May 24, 2016 at 9:00 a.m. CEST or 5:00 p.m. CEST.
Training Webinar - New GOM Software 2016 - 3D Metrology
The new GOM Software 2016 provides a wide range of new innovative functions and enhancements in the field of 3D metrology. The webinar will take place on May 19, 2016 in English and German.
Training Webinar - 2D Digital Image Correlation with GOM Correlate
GOM Correlate provides free 2D digital image correlation, which supports the evaluation and reporting of any digital image series or video file. The GOM training webinar will take place on May 11, 2016 in English and German.
Application Webinar - Optical 3D Metrology for Aerospace Testing
The development and manufacturing of a modern aircraft is an extremely complex process and demands careful balance between safety, technical abilities, design, available technologies and costs. Join the webinar on April 20, 2016.
Application Webinar - Shear Test
Optical metrology can support new material developments and quality assurance by providing precise full-field results of shear angles by non-contact measurements. On April 13, 2016, GOM invites you to the webinar "Shear Test".
Application Webinar - Automotive Testing
GOM invites you to a webinar which will discuss applications from the automotive industry in the areas of stiffness- and crash testing, motion analysis and the evaluation of thermal deformation of components tested in climate chambers.
Training Webinar - Customizable Checks
GOM is continuing the webinar series on the new functional highlights of the V8 SR1 software offering a further webinar with the topic "Customizable Checks" on February 17, 2016, at 9:00 a.m. CET or 5:00 p.m. CET.
Training Webinars - New Functionalities for GOM V8 SR1 Software
In the field of 3D metrology, the new GOM V8 SR1 software provides an extended range of functions and enhancements for ATOS, GOM Inspect, GOM Scan, TRITOP and PONTOS Live. GOM is running a series of webinars to give you an introduction to the new software functionalities.
Application Webinar - High Speed Component Testing
High speed tests are an important tool of today’s product development, as they enable the analysis of components’ reaction to impact events or crashes. Join the webinar to hear more about the use of optical metrology in high speed component testing.
Application Webinar - Biomechanics/Medical
GOM invites you to a Webinar which will discuss various applications for optical 3D metrology in the area of medical / biomechanics testing and quality control.
New GOM V8 Software / Training Webinars
GOM is launching the new V8 Software with a range of new features for 3D measurement and 3D inspection. In conjunction with the release of the software, GOM is running a series of webinars to give you an introduction to the new software functionalities.
Application Webinar - Tensile Testing
The determination of material parameters through tensile tests are widely used for new material developments and the control of material quality. GOM invites you to a webinar which covers the determination of material parameters and how this is performed using ARAMIS.
Application Webinar - Verification of Numerical Simulations
Numerical simulations are today widely used for research and development in all industries. This webinar details how optical metrology is used for the verification of numerical simulations.
Industriële 3D meettechniek