Basic Level System and Software Training

The range of basic level classroom training courses includes system and software training. Each course combines theoretical knowledge with practical training. Various exercises on the systems and software ensure a productive learning environment. The training courses are especially recommended if participants are new to the GOM world or if they just want to refresh their knowledge about GOM systems and software.

ATOS Professional System Basic Training Modules

The training course comprises an acquisition module and an inspection module. Participants learn all basic strategies for scanning parts of different sizes using an ATOS sensor. In the inspection module, participants learn to use the GOM Inspect Professional software for shape and dimension analyses, 3D inspections and mesh processing of the scanned 3D measuring data.

During the three-day training course, participants with no or very little experience with coordinate measuring technology will learn the basic strategies for working with an ATOS sensor and ATOS Professional software.

At the end of the training participants are able to:

  • Handle the ATOS sensor
  • Create a project in the GOM software
  • Handle reference points
  • Digitize measuring objects which fill the measuring volume or which are considerably larger
  • Change the ATOS sensor to a different measuring volume
  • Polygonize the measured data
  • Carry out an automated rotation table measurement
  • Measure with reflection detection
  • Measure without reference points
  • Measure small measuring objects
  • Use project templates
  • Edit polygonized measuring data
  • Import and edit scan data
  • Carry out simple inspections
  • Understand creation parameters and element dependencies
  • Carry out best-fit and RPS alignments and apply measuring principles
  • Plan inspections based on nominal data
  • Display, sort and export value tables and diagrams as well as insert them in reports
  • Create and edit reports and change the layout
  • Create project templates
  • Create a user-defined inspection principle
  • Create a stage project and carry out simple trend analyses
  • Perform a 3-2-1 alignment
  • Measure distances, diameters and angles
  • Create 2D sections

Prerequisites: Basic knowledge of window-based programs, fundamentals of coordinate measuring technology (AUKOM Level 1 recommended)

Target group: Users of ATOS sensors and ATOS Professional

Certificate: ATOS Professional System Basic Training

Dates in Germany:

Braunschweig
GOM Gmb
H, Schmitzstraße 2

  • January 8 - January 10, 2018 (Week 2) - fully booked
  • January 15 - January 17, 2018 (Week 3)
  • January 29 - January 31, 2018 (Week 5) - fully booked
  • February 5 - February 7, 2018 (Week 6)
  • February 13 - February 15, 2018 (Week 7)
  • February 19 - February 21, 2018 (Week 8)
  • February 26 - February 28, 2018 (Week 9)
  • March 12 - March 14, 2018 (Week 11)
  • March 20 - March 22, 2018 (Week 12)
  • March 26 - March 28, 2018 (Week 13)

Göppingen
topometric GmbH, Wilhelm-Zwick-Straße 7

  • January 8 - January 10, 2018 (Week 2) - fully booked
  • January 29 - January 31, 2018 (Week 5)
  • February 12 - February 14, 2018 (Week 7)
  • March 5 - March 7, 2018 (Week 10)
  • March 12 - March 14, 2018 (Week 11)
  • March 19 - March 21, 2018 (Week 12)

The training module takes place on five consecutive days from 9:00 a.m. to 5:00 p.m.

Send your request now:

In the two-day training course, users can inspect the 3D measurement data in GOM software. The training course is suitable for users who have no or very little experience with the software-based evaluation of digitized measuring objects. Evaluation requires the software packages GOM Inspect Professional or ATOS Professional.

At the end of the training participants are able to:

  • Import and edit scan data
  • Carry out simple inspections
  • Understand creation parameters and element dependencies
  • Carry out best-fit and RPS alignments and apply measuring principles
  • Plan inspections based on nominal data
  • Display, sort and export value tables and diagrams as well as insert them in reports
  • Create and edit reports and change the layout
  • Create project templates
  • Create a user-defined inspection principle
  • Create a stage project and carry out simple trend analyses
  • Perform a 3-2-1 alignment
  • Measure distances, diameters and angles
  • Create 2D sections

Prerequisites: Basic knowledge of window-based programs, fundamentals of coordinate measuring technology (AUKOM Level 1 recommended)

Target group: Users of ATOS Professional or GOM Inspect Professional

Certificate: Inspection Basic Training – 3D Metrology

Dates in Germany:

Braunschweig
GOM Gmb
H, Schmitzstraße 2

  • January 9 - January 10, 2018 (Week 2) - fully booked
  • January 16 - January 17, 2018 (Week 3) - fully booked
  • January 30 - January 31, 2018 (Week 5) - fully booked
  • February 6 - February 7, 2018 (Week 6)
  • February 14 - February 15, 2018 (Week 7)
  • February 20 - February 21, 2018 (Week 8)
  • February 27 - February 28, 2018 (Week 9)
  • March 13 - March 14, 2018 (Week 11)
  • March 21 - March 22, 2018 (Week 12)
  • March 27 - March 28, 2018 (Week 13)

Göppingen
topometric GmbH, Wilhelm-Zwick-Straße 7

  • January 9 - January 10, 2018 (Week 2) - fully booked
  • January 30 - January 31, 2018 (Week 5)
  • February 13 - February 14, 2018 (Week 7)
  • March 6 - March 7, 2018 (Week 10)
  • March 13 - March 14, 2018 (Week 11)
  • March 20 - March 21, 2018 (Week 12)

The training module takes place on five consecutive days from 9:00 a.m. to 5:00 p.m.

Send your request now:

ARAMIS Professional System Basic Training Modules

The training course includes an acquisition module and an inspection module. All basic strategies for handling ARAMIS sensors and for capturing dynamic part specimens based on reference point markers or stochastic patterns are covered in the acquisition module. In the inspection module, participants learn how to carry out static and dynamic component tests based on the measuring results.

During the three-day training course, participants will get to know all basics, concepts and working methods for acquiring and evaluating data with an ARAMIS system. The training addresses new users of the ARAMIS system who have little or no knowledge of coordinate measuring technology.

At the end of the training participants are able to:

  • Handle the ARAMIS sensor
  • Create a project in the GOM software
  • Handle reference points
  • Apply stochastic patterns on a measuring object
  • Check stochastic patterns in the GOM software
  • Align measuring data
  • Measure movements of an object
  • Change the ARAMIS sensor to a different measuring volume
  • Define user-defined measuring sequences
  • Create components
  • Carry out simple inspections
  • Understand creation parameters and element dependencies
  • Carry out 3-point alignments and best-fit alignments
  • Construct elements, use measuring principles and check elements
  • Show, adjust and export diagrams
  • Create and edit reports and change the layout
  • Create a user-defined inspection principle
  • Create project templates

Prerequisites: Basic knowledge of window-based programs

Target group: Users of ARAMIS sensors and ARAMIS Professional

Certificate: ARAMIS Professional System Basic Training

Dates in Germany:

Braunschweig
GOM GmbH, Schmitzstraße

  • January 8 - January 10, 2018 (Week 2) - Training in English
  • January 29 - January 31, 2018 (Week 5)
  • February 12 - February 14, 2018 (Week 7)
  • February 27 - March 01, 2018 (Week 9)
  • March 12 - March 14, 2018 (Week 11)

The training module takes place on five consecutive days from 9:00 a.m. to 5:00 p.m.

Send your request now:

GOM Correlate Professional can be used to evaluate 3D point-based measuring data and measuring data derived from stochastic patterns. The two-day training course is aimed at interested persons who have little or no knowledge of a software-based evaluation of measuring objects.

At the end of the training participants are able to:

  • Import and edit scan data
  • Carry out simple inspections
  • Understand creation parameters and element dependencies
  • Carry out best-fit and RPS alignments and apply measuring principles
  • Plan inspections based on nominal data
  • Display, sort and export value tables and diagrams as well as insert them in reports
  • Create and edit reports and change the layout
  • Create project templates
  • Create a user-defined inspection principle
  • Create a stage project and carry out simple trend analyses
  • Perform a 3-2-1 alignment
  • Measure distances, diameters and angles
  • Create 2D sections

Prerequisites: Basic knowledge of window-based programs

Target group: Users of ARAMIS Professional or GOM Correlate Professional

Certificate: Inspection Basic Training – 3D Testing

Dates in Germany:

Braunschweig
GOM GmbH, Schmitzstraße 2

  • January 9 - January 10, 2018 (Week 2) - Training in English
  • January 30 - January 31, 2018 (Week 5)
  • February 13 - February 14, 2018 (Week 7)
  • February 28 - March 01, 2018 (Week 9)
  • March 13 - March 14, 2018 (Week 11)

The training module takes place on five consecutive days from 9:00 a.m. to 5:00 p.m.

Send your request now:

TRITOP Professional System Basic Training Modules

The training course consists of an acquisition module and an inspection module. The acquisition module deals with all basic strategies for the photogrammetric acquisition of 3D coordinates of selected points of a measuring object using a TRITOP photogrammetry camera. The inspection module covers all essentials required for evaluating measuring data.

The three-day training course teaches participants who have no or very little experience with coordinate measuring technology the basic strategies for working with the TRITOP system and the application software TRITOP Professional.

At the end of the training participants are able to:

  • Set up a photogrammetry project
  • Handle the workspace photogrammetry in the ATOS software
  • Define the size of reference points
  • Use the shooting techniques correctly
  • Handle flat measuring objects
  • Handle large and complex measuring objects
  • Load photogrammetry images into the project
  • Click 3D point in the software
  • Delete 3D points
  • Export 3D points
  • Evaluate photogrammetry images
  • Import and edit stage data
  • Carry out simple inspections
  • Understand creation parameters and elements dependencies
  • Carry out 3-point alignments and best-fit alignments
  • Construct elements, use measuring principles and check elements
  • Display, sort and export value tables and diagrams as well as insert them in reports
  • Create and edit reports and change the layout
  • Create a user-defined inspection principle
  • Create project templates
  • Change label templates

Prerequisites: Basic knowledge of window-based programs, fundamentals of coordinate measuring technology (AUKOM Level 1 recommended)

Target group: Users of TRITOP photogrammetry cameras and ATOS Professional or TRITOP Professional

Certificate: TRITOP Professional System Basic Training

Dates in Germany:

Braunschweig
GOM GmbH,
Schmitzstraße 2

  • February 5 - February 07, 2018 (Week 6)
  • March 19 - March 21, 2018 (Week 12)

The training module takes place on five consecutive days from 9:00 a.m. to 5:00 p.m.

Send your request now:

The two-day training course is aimed at interested persons who have no or very little experience in the software-based evaluation of measuring objects. The software packages GOM Inspect, GOM Inspect Professional, TRITOP Professional or PONTOS Live are suitable for the evaluation of the measurement data.

At the end of the training participants are able to:

  • Import and edit stage data
  • Carry out simple inspections
  • Understand creation parameters and element dependencies
  • Carry out 3-point alignments and best-fit alignments
  • Construct elements, use measuring principles and check elements
  • Display, sort and export value tables and diagrams as well as insert them in reports
  • Create and edit reports and change the layout
  • Create a user-defined inspection principle
  • Create project templates
  • Change label templates
  • Prerequisites: Basic knowledge of window-based programs, fundamentals of coordinate measuring technology (AUKOM Level 1 recommended)

    Target group: Users of TRITOP Professional or GOM Inspect Professional or PONTOS Live

    Certificate: Inspection Basic Training – Photogrammetry

Dates in Germany:

Braunschweig
GOM GmbH,
Schmitzstraße 2

  • February 06 - February 07, 2018 (Week 6)
  • March 20 - March 21, 2018 (Week 12)

The training module takes place on five consecutive days from 9:00 a.m. to 5:00 p.m.

Send your request now:

The one-day training course teaches participants who have no or very little experience with coordinate measuring technology all of the basic strategies for working with photogrammetry cameras and the application software ATOS Professional and ATOS Professional VMR.

At the end of the training participants are able to:

  • Set up a photogrammetry project
  • Handle the workspace Photogrammetry in the ATOS software
  • Define the size of reference points
  • Use the shooting techniques correctly
  • Handle flat measuring objects
  • Handle large and complex measuring objects
  • Load photogrammetry images into the project
  • Click 3D points in the software
  • Delete 3D Points
  • Export 3D points
  • Evaluate photogrammetry images

Prerequisites: Basic knowledge of window-based programs, fundamentals of coordinate measuring technology (AUKOM Level 1 recommended)

Target group: Users of TRITOP photogrammetry cameras and ATOS Professional or TRITOP Professional

Certificate: Acquisition Basic Training – Photogrammetry

Dates in Germany:

Braunschweig
GOM GmbH,
Schmitzstraße 2

  • February 5, 2018 (Week 6)
  • March 19, 2018 (Week 12)

Göppingen
topometric GmbH, Wilhelm-Zwick-Straße 7

  • February 15, 2018 (Week 7)
  • March 22, 2018 (Week 12)

The training module takes place on five consecutive days from 9:00 a.m. to 5:00 p.m.

Send your request now:

*separately bookable