AUKOM

As a member of AUKOM, GOM is a certified partner and training provider of AUKOM training courses. The AUKOM association promotes fundamental and sound training in the field of industrial production measurement technology, especially in the field of coordinate measuring technology. With its training program in production measurement technology, AUKOM guarantees that the levels of the courses provided by partners are comparable.

The multi-stage training courses convey device-independent knowledge, including established and practice-tested procedures. The modular courses are based on each other and end with a certified and worldwide accepted final exam.

System-Independent Basic Metrology Training

The five-day training course includes basic knowledge of production metrology for beginners and advanced metrologists. The training provides the latest knowledge regarding dimensional tolerancing, programming basics and measurement process planning. It covers also the machine and sensor technology used. The enhanced understanding of measuring tasks and influencing parameters enables measuring technicians to reduce measuring uncertainties.

Content AUKOM Level 1:

  • Standard Units – Base Quantities and Derived Quantities
  • Coordinate Systems
  • Coordinate Measuring Machines
  • Sensors and Coordinate Measuring Machines
  • Basic Definitions
  • Dimensional Tolerance – Introduction and Application
  • Geometric Elements
  • Geometric Constructions and Calculation
  • Preparing a Measurement on the Coordinate Measuring Machine
  • Stylus Selection and Qualification
  • Measuring Using Coordinate Measuring Machines
  • Evaluation of Measurement and Statistics
  • Inspection Planning – Identification and Evaluation of Inspection Features
  • Documentation and Quality Management

Prerequisites: No special knowledge required

Target group: Beginners in the field of production measurement technology

Exam and certificate: AUKOM Level 1

Dates in Germany:

Braunschweig
GOM GmbH, Schmitzstraße 2

  • January 15 - January 19, 2018 (Week 3)
  • March 05 - March 09, 2018 (Week 10)
  • April 23 - April 27, 2018 (Week 17)
  • June 18 - June 22, 2018 (Week 25)
  • August 13 - August 17, 2018 (Week 33)
  • October 08 - October 12, 2018 (Week 41)

The training module takes place on five consecutive days from 9:00 a.m. to 5:00 p.m.

Send your request now:

The five-day training course broadens basic knowledge of production metrology for advanced metrologists. The training comprises the latest knowledge on the topic form and positional tolerance, test plan interpretation, programming and monitoring. It covers also the machine and sensor technology used.

Content AUKOM Level 2:

  • Overview of the Entire Measuring Procedure
  • Geometric Overview
  • Form and Positional Tolerances
  • Measuring Strategy – Efficient Measurement of Parts
  • Probing Strategy – Tactile
  • Probing Strategy – Image Processing
  • Probing Strategy – Distance Sensors
  • CNC Programming – Building up Measurement Programs
  • Measurement of Freeform Surfaces
  • Evaluation – Criteria and Methods
  • Effects on the Measurement Result
  • Documentation of Measurement Result
  • Test Equipment Monitoring
  • Good Measurement Practice

Prerequisites: Passed exam of AUKOM Level 1

Target group: Advanced production metrologists

Exam and certificate: AUKOM Level 2

Dates in Germany:

Braunschweig
GOM GmbH, Schmitzstraße 2

  • February 19 - February 23, 2018 (Week 8)
  • May 14 - May 18, 2018 (Week 20)
  • August 06 - August 10, 2018 (Week 32)
  • October 29 - November 02, 2018 (Week 44)

The training module takes place on five consecutive days from 9:00 a.m. to 5:00 p.m.

Send your request now:

Participants of the three-day course are given in-depth information on geometric dimensioning and tolerancing according to ISO and ASME for measurement engineers who work at interfaces to other departments. Design engineers, developers, and production engineers gain insight into geometric dimensioning and tolerancing from the measurement engineer’s point of view, who has to implement drawing specifications metrologically.

Content AUKOM GD&T:

  • Basics of the ISO standard on Geometrical Product Specification (GPS) Introduction
  • Geometric Dimensioning and Tolerancing (GD&T)
  • Principles of tolerancing I
  • Principles of tolerancing II
  • Tolerances of form, orientation, location and run-out – ASME
  • Workshop

Prerequisites: Passed exam of AUKOM Level 2

Target group: Experienced measurement engineers

Certificate: AUKOM GD&T

Dates in Germany:

Braunschweig
GOM GmbH, Schmitzstraße 2

  • September 10 – September 12, 2018 (Week 37)

Each training module is being taught from 9:00 a.m. to 5:00 p.m.

Request

Send your request now:

In the five-day training course, experienced measurement engineers broaden their advanced metrological knowledge, with particular regard to form and positional tolerances, test plan interpretation, programming, monitoring as well as mechanical engineering and sensor engineering. By gaining a deeper understanding of the measurement tasks and influential variables, measurement engineers learn how to reduce measurement uncertainties and to achieve more reliable and comparable measuring results.

Content AUKOM Level 3:

  • Geometry, production technology and CAD
  • Point clouds and computer tomography
  • Creation of measurement programs
  • Digital filtering and evaluation
  • Monitoring of CMMs
  • Measuring uncertainty and measuring process suitability
  • Quality management
  • Process monitoring
  • Aspects of measuring room management

Prerequisites: Successful completion of AUKOM GD&T

Target group: Experienced production metrologists

Certificate: AUKOM Level 3

Dates in Germany:

Braunschweig
GOM GmbH, Schmitzstraße 2

  • April 9 – April 13, 2018 (Week 15)
  • September 24 – September 28, 2018 (Week 39)

Each training module is being taught from 9:00 a.m. to 5:00 p.m.

Request

Send your request now: