Industriële 3D meettechniek
ATOS Triple Scan
ATOS Compact Scan
ATOS ScanBox Series 4
ATOS ScanBox Series 5
ATOS ScanBox Series 6
ATOS ScanBox Series 7
ATOS ScanBox Series 8
ATOS for Education
ARAMIS for Education
GOM Education Award
GOM System Software
Virtual Measuring Room
Open Data Formats
Material Testing & Simulation
Press and Body Shop
Test Stands & Component Testing
Fuselage & Cabin
Gas- & Steamturbines
Sheet Metal Forming
FEA / Simulation Verification
Sheet Metal Parts
Automated Quality Control
Casting and Foundry
Historiek GOM Evenementen
GOM Conference 2015 - Preliminary Program available
Speakers from well-known companies such as ThyssenKrupp, adidas, ETH Zurich, Brose und Škoda will share their first-hand experiences using optical metrology systems at the GOM Conference. The preliminary program is now available.
3D Metrology in Sheet Metal Forming Process Chains
In order to fulfill increasing quality demands as well as high cost and time pressure, the sheet metal industry relies on optical measurement systems. This is what the exchange of experts revealed at the GOM Workshop Sheet Metal Forming.
Application Webinar - High Speed Component Testing
High speed tests are an important tool of today’s product development, as they enable the analysis of components’ reaction to impact events or crashes. Join the webinar on June 24th, 2015 at 09:00 CEST or 18:00 CEST to hear more about the use of optical metrology in high speed component testing.
GOM Inspect Introduction Seminar - Additional Date in July 2015
Due to the high demand for GOM Inspect Introduction Seminars in the first half of 2015, GOM is expanding the current schedule by offering an additional session to be held on 6 July 2015 in Braunschweig, Germany.
First GPS Training (GD&T) – Dates in May and October
GOM and dim GmbH are pleased to jointly offer their first GPS Training (GD&T) in Braunschweig, Germany. Due to the limited number of participants, we recommend to register as quickly as possible.
MCAE User Meeting – Trends in Optical 3D Metrology
Some 100 professional technicians from prominent industries and institutions came together at a joint GOM user meeting that took place at Hotel Atlantis at Brno Dam and at MCAE’s headquarters in Kuřim on March 4 and 5, 2015.
GOM Workshop Sheet Metal Forming on May 20, 2015 in Germany
Well-known companies – among them Volkswagen, Salzgitter Mannesmann Forschung and Wolf Werkzeuge – will share their experiences and show how 3D measuring systems are used in sheet metal forming process chains for consistent quality assurance.
3D Conference in Korea Presented the Latest Developments in Optical Metrology
OMA, our partner in Korea, organized a two-day 3D Conference held in Daejeon on 11th and 12th December, 2014. Some 140 participants came to Chungnam National University to discuss the latest developments in GOM technologies.
Additional Venue for GOM Inspect Introduction Seminars
Due to the large number of participants attending the GOM Inspect Introduction Seminars in Braunschweig, we are pleased to announce that this training can now be offered at a second location in Southern Germany.
GOM Workshop Sheet Metal Forming on May 20, 2015 in Germany
The GOM Workshop “3D Metrology in Sheet Metal Forming Process Chains” on May 20, 2015 in Darmstadt will show how 3D measuring systems are used in stamping, bending, drawing, pressing, and forming process chains for quality assurance.
Metronic Organized a Casting and Forging Workshop in Spain
On 6th November 2014, our Spanish distributor Metronic held a Casting and Forging Workshop in the Automotive Intelligence Center in Bizkaia, Spain.
Casting and Forging Workshop in Brazil
On 5th November 2014, our Brazilian partner Robtec held a Casting and Forging Workshop in São Paulo. Some 50 participants joined the event at the Holiday Inn hotel in order to learn about the latest developments in optical 3D metrology for the casting and forging industries.
CIM Co. held Casting and Forging Workshop in Mexico
On 24th September 2014, our Mexican distributor CIM Co. hosted a user meeting in Monterrey and presented the latest developments in industrial 3D metrology for casting and forging processes to some 30 participants.
GOM 3D Metrology Conference - Save the Date
The GOM Conference from 21st to 24th September 2015 in Braunschweig, Germany will show in user presentations, live demonstrations and the trade show, how optical measuring systems shorten development cycles and improve production processes.
GOM UK Convention 2015
The GOM UK Convention 2015 focuses on the integration of optical measuring techniques in industry and research. The conference offers a platform to exchange experiences about measurement solutions and applications using the GOM optical measuring systems. The GOM UK Convention 2015 will take place from 25-26 February 2015 at The Warwickshire, Warwick, United Kingdom.
Application Webinar - Automotive Testing
GOM invites you to a Webinar which will discusses applications from the automotive industry in the areas of stiffness- and crash testing, motion analysis and the evaluation of thermal deformation of components tested in climate chambers.
GOM Partner Lenso organized 3D User Meeting in Poland
Our Polish partner Lenso held a four-day 3D User Meeting. More than 100 participants attended the event at the Remes hotel in Opalenica, Poland, from 16th to 19th September 2014.
Application Webinar - Biomechanics/Medical
GOM invites you to a Webinar which will discuss various applications for optical 3D metrology in the area of medical / biomechanics testing and quality control.
GOM Testing Workshop: Optical Measuring Systems replace conventional Methods
In order to speed up the product creation process, design and test engineers as well as specialists from research & development rely on optical measurement systems. This is what the exchange of experts revealed at the GOM Testing Workshop.
User meeting in Thailand presented latest developments in GOM technology
In October, our distributor Mentel held an user meeting in Bangkok, Thailand, and presented the latest developments and technologies of optical 3D metrology from GOM to some 50 participants from industry and research.
GOM Inspect Introduction Seminars – Dates for 2015
Next year, GOM will be offering new GOM Inspect Introduction Seminars in Braunschweig. On six regular dates, users from the fields of RP, CAD/CAM, CAE and CAQ will get the chance to test GOM Inspect in practice.
GOM France - Bègles Open Days 2014
On November 18-19, 2014 the team of GOM France will inaugurate its new agency in Bègles (Gironde) in the south-west. In the presence of industrial experts from the south/south-west, GOM users and experts will exchange information about technological advances and the latest developments.
Two successful Casting Workshops in Vietnam
In September, our distributor AIE organized two workshops in the north and south of Vietnam. The main objective of the two events was to highlight the importance of optical metrology for the casting industry.
Injection Molding Workshop in Sweden
On September 25, 2014, our Swedish distributor Cascade welcomed around 65 attendees to the Injection Molding Workshop in Mölndal in order to share its experience about the latest trends in the injection molding industry.
GOM Workshop in Italy - 3D Coordinate Measuring Techniques in Injection Molding
The GOM Workshop is an industrial meeting platform for design engineers, tool and mold makers as well as specialists from quality assurance and production. The free workshop offers an insight into how optical 3D metrology is integrated into modern injection molding process chains.
Application Webinar - Aerospace Testing
GOM invites you to a Webinar which will discuss applications from the aerospace industry using ARAMIS and PONTOS covering topics from smaller scale measurement such as coupon- and element testing up to evaluation of sub-components deformation behavior.
GOM Inspect Introduction Seminars – Dates in September, October and November
The next regular GOM Inspect Introduction Seminars will be held in Braunschweig on September 29 and November 10, 2014. There are still some seats available for the date in November. Furthermore, we are pleased to offer an additional seminar on October 06, 2014.
New GOM V8 Software / Training Webinars
GOM is launching the new V8 Software with a range of new features for 3D measurement and 3D inspection. In conjunction with the release of the software, GOM is running a series of webinars to give you an introduction to the new software functionalities.
GOM workshop in Italy - Optical Measuring Techniques in Casting & Forging
On June 13, 2014 the free GOM Workshop offers an insight into how optical 3D metrology is an industrial standard all over the world. This technology supports and speeds up all phases in the production processes: from mold and core making, right through to first article inspection. User presentations and live demonstrations staged by our GOM team are scheduled!
GOM Inspect Introduction Seminar - Worthwhile day!
Another GOM Inspect Introduction Seminar is going to be held in Braunschweig on June 23, 2014. In response to great demand, we are also pleased to offer an alternative date, again in Braunschweig, on July 14, 2014.
Application Webinar - Tensile Testing
The determination of material parameters through tensile tests are widely used for new material developments and the control of material quality. GOM invites you to a webinar which covers the determination of material parameters and how this is performed using ARAMIS.
GOM Workshop for Material Testing in China
Our Chinese distributor DOM 3D joined forces with GOM, Zwick and WISCO (Wuhan Iron & Steel Corp.) to hold a special workshop in Wuhan, China, on March 27 to 28, 2014. The workshop was attended by 103 interested visitors from research and industry and focused on testing sheet metal materials.
More than 170 participants at Injection Molding Workshop in Darmstadt
For plastic components, the complexity of shapes and functions is constantly growing – with consequences for quality control. This was the result of the exchange among experts at the GOM Injection Molding Workshop in Darmstadt, Germany.
Application Webinar - Verification of Numerical Simulations
Numerical simulations are today widely used for research and development in all industries. This webinar details how optical metrology is used for the verification of numerical simulations.
Additional GOM Inspect Introduction Seminar in May 2014
In response to the great demand for our GOM Inspect Introduction Seminar in March, we are now offering an additional event in Braunschweig on May 12, 2014. As participation is limited to ten persons per event, we advise you to register as soon as possible.
A large audience at the “GOM Inspect” workshop – New visitor record for GOM Italia
A large audience met at the GOM Inspect Introduction Seminar in Italy. During the well-attended presentation, participants learned about the numerous features of the GOM Inspect software: CAD import, mesh generation, the creation of multiple dimensional alignments and analysis, and GD&T.
160 Participants at Casting and Forging Workshop in Darmstadt
The growing demand for design and product quality makes full-field and fast inspection of components necessary. That was the main conclusion drawn at the GOM Workshop "Industrial 3D Measurement Techniques in Casting & Forging Processes".
Marubeni organized GOM Conference in Japan
In November 2013, our Japanese partner Marubeni Information Systems hosted a GOM Conference in Tokyo and Nagoya, each involving about 100 participants.
GOM Inspect Introduction Seminar – Dates for 2014
The next seminar will be held in Braunschweig on March 10, 2014. In a practically oriented environment, you will learn how to use the software most efficiently for your requirements and applications in 3D inspection and mesh processing or for the communication of measurement results. Here, you will find further dates, information and a register form.
AIE User Meeting 2013 in Hanoi, Vietnam
At its user meeting on December 19, 2013, our distributor AIE proudly presented the new ATOS Core scanners to local automotive manufacturers and their suppliers from the northern region of Vietnam. More than 40 attendees were present at the meeting in the Hanoi Communication Department in Vietnam’s capital.
First High Tech’s User Meetings 2013 in Malaysia and Singapore
Our partner First High Tech staged two successful user meetings in Malaysia and Singapore in December 2013.
DOM 3D Workshop in Shanghai
On November 13 and 14, 2013, our Chinese partner DOM 3D organized a GOM workshop for around 50 customers and 30 interested parties at the “German Centre” in Shanghai.
GOM Conference 2013 shows latest developments of optical 3D metrology
With more than 600 visitors, the GOM Conference proved to be an established forum for experts in metrology, quality control and product development. This year, the focus was on automated quality control and material and component testing.
Workshops in the USA provide insight into optical metrology
Our partner Trilion organized two workshops in the USA at the end of June - cooperating with the University of Alabama in Huntsville and the University of Houston along with our partner Capture 3D.
GOM Conference 2013 – Preliminary Program
The preliminary program for this year’s GOM Conference is now available.
GOM Inspect Introduction Seminar - Additional date in August
If you did not have the chance to join the seminar in June and you would like to visit our GOM Inspect Introduction Seminar in August, we are pleased to announce that in response to the strong demand we offer an additional date in Braunschweig on August 12, 2013.
GOM Inspect Introduction Seminar - Additional date on June 10, 2013
In response to the great demand we are looking forward to offer an additional date for the GOM Inspect Introduction Seminar. Register now and learn everything you need to know about the powerful software.
AIE User Meeting 2013 in Vietnam
AIE, our partner in Vietnam, organized two nice User Meetings in April 2013, with over 50 attendees in Hanoi and 30 visitors in Ho-Chi-Min-City.
GOM Inspect Introduction Seminar - Register now
Take this opportunity to register for the GOM Inspect Introduction Seminar on April 23, 2013. Over the course of a whole day you have the chance to benefit from our experts' knowledge in a practically oriented environment.
Injection Molding Workshop 2013 at Marubeni (Japan)
On January 25, 2013, around 25 participants came together for the Injection Molding Workshop at the Marubeni Office in Tokyo.
Industriële 3D meettechniek
Facebook GOM Metrology
YouTube GOM Metrology
LinkedIn GOM Metrology
XING GOM GmbH