Precise Industrial 3D Metrology
Review GOM Events
ATOS Triple Scan
ATOS Compact Scan
ATOS ScanBox Series 4
ATOS ScanBox Series 5
ATOS ScanBox Series 6
ATOS ScanBox Series 7
ATOS ScanBox Series 8
ATOS for Education
ARAMIS for Education
GOM Education Award
GOM System Software
Virtual Measuring Room
Open Data Formats
Material Testing & Simulation
Press and Body Shop
Test Stands & Component Testing
Fuselage & Cabin
Gas- & Steamturbines
Sheet Metal Forming
FEA / Simulation Verification
Sheet Metal Parts
Automated Quality Control
Casting and Foundry
GOM's ATOS Compact Scan was used to measure “Alchemy” by Jackson Pollock
The results of the digitization of the famous painting have then been used to create a physical reproduction for the exposition "ALCHEMY BY JACKSON POLLOCK. Discovering the Artist at Work" (Peggy Guggenheim Collection, Venice).
Summer closure GOM Italia
GOM Italia office will be closed for summer holidays from August 10th to August 21st, 2015 (incl.).
ARAMIS - Measuring the Movement
adidas developed its latest running shoe – Ultra Boost – by using optical measurement technology from GOM. Find out in a video, how adidas uses the ARAMIS system for optical deformation analysis in a running test in order to determine strain results.
Conference in Shanghai – GOM Product Developments in the Automotive Industry
On May 28, 2015, our Shanghai-based subsidiary organized a conference on the “New Challenges in Global Automotive Quality”, stressing the impact of optical metrology on the automotive sector.
GOM Conference 2015 - Preliminary Program available
Speakers from well-known companies such as ThyssenKrupp, adidas, ETH Zurich, Brose und Škoda will share their first-hand experiences using optical metrology systems at the GOM Conference. The preliminary program is now available.
3D Metrology in Sheet Metal Forming Process Chains
In order to fulfill increasing quality demands as well as high cost and time pressure, the sheet metal industry relies on optical measurement systems. This is what the exchange of experts revealed at the GOM Workshop Sheet Metal Forming.
Application Webinar - High Speed Component Testing
High speed tests are an important tool of today’s product development, as they enable the analysis of components’ reaction to impact events or crashes. Join the webinar on June 24th, 2015 at 09:00 CEST or 18:00 CEST to hear more about the use of optical metrology in high speed component testing.
Life Cycle of Running Blades Calculated with 3D Measuring Data
In order to exactly calculate the life cycle of running blades, researchers of the University of Paderborn, Germany, examined the durability of these prostheses. During load testing, optical measuring systems were used.
GOM Inspect Introduction Seminar - Additional Date in July 2015
Due to the high demand for GOM Inspect Introduction Seminars in the first half of 2015, GOM is expanding the current schedule by offering an additional session to be held on 6 July 2015 in Braunschweig, Germany.
First GPS Training (GD&T) – Dates in May and October
GOM and dim GmbH are pleased to jointly offer their first GPS Training (GD&T) in Braunschweig, Germany. Due to the limited number of participants, we recommend to register as quickly as possible.
MCAE User Meeting – Trends in Optical 3D Metrology
Some 100 professional technicians from prominent industries and institutions came together at a joint GOM user meeting that took place at Hotel Atlantis at Brno Dam and at MCAE’s headquarters in Kuřim on March 4 and 5, 2015.
GOM Workshop Sheet Metal Forming on May 20, 2015 in Germany
Well-known companies – among them Volkswagen, Salzgitter Mannesmann Forschung and Wolf Werkzeuge – will share their experiences and show how 3D measuring systems are used in sheet metal forming process chains for consistent quality assurance.
Precise Industrial 3D Metrology Solutions at the Moulding Expo 2015
At the Moulding Expo 2015, GOM will be presenting the newest developments in optical metrology and state-of-the-art hardware and software solutions. Order your free ticket now and visit us in Hall 4, Booth 4E22.
GOM at Control 2015 - Order your free ticket
GOM presents the complete range of its industrial sensor technology and its efficient measuring and inspection software. Order your free ticket now and visit us at Control 2015.
GOM at Affidabilità & Tecnologie 2015
GOM Italy is pleased to introduce the new V8 version of the software GOM Inspect and GOM Inspect Professional at Affidabilità & Tecnologie 2015 in Turin from april 22-23.
GOM Italia vi aspetta a MECSPE 2015
In occasione della fiera MECSPE di Parma in programma dal 26 al 28 marzo 2015, GOM Italia è lieta di presentare le sue ultime novità nel campo della metrologia ottica 3D tra le quali l'ATOS ScanBox 5120, e la nuova versione V8 del software PONTOS Live.
Evénements GOM France - Juin 2015
En juin 2015, vous aurez la possibilité de découvrir les technologies GOM intégrées dans différents process industriels. Les 9 & 10 juin, l'ENSAM Metz vous accueille pour un workshop "Fonderie, Forge, Emboutissage". Les 23 & 24 juin, c'est avec la société VECTEO que GOM a travaillé en partenariat pour vous proposer une journée technique sur 'l'automatisation de la mesure 3D', à l'IUT du Creusot.
3D Conference in Korea Presented the Latest Developments in Optical Metrology
OMA, our partner in Korea, organized a two-day 3D Conference held in Daejeon on 11th and 12th December, 2014. Some 140 participants came to Chungnam National University to discuss the latest developments in GOM technologies.
Additional Venue for GOM Inspect Introduction Seminars
Due to the large number of participants attending the GOM Inspect Introduction Seminars in Braunschweig, we are pleased to announce that this training can now be offered at a second location in Southern Germany.
New Silhouette and Cluster Feature in V8 Software
GOM extended the features with the launch of the V8 software. The current software enables optimized evaluations based on the creation of silhouettes and a fast and easy analysis of recurring structures using the Cluster feature.
GOM Workshop Sheet Metal Forming on May 20, 2015 in Germany
The GOM Workshop “3D Metrology in Sheet Metal Forming Process Chains” on May 20, 2015 in Darmstadt will show how 3D measuring systems are used in stamping, bending, drawing, pressing, and forming process chains for quality assurance.
Metronic Organized a Casting and Forging Workshop in Spain
On 6th November 2014, our Spanish distributor Metronic held a Casting and Forging Workshop in the Automotive Intelligence Center in Bizkaia, Spain.
Automotive Testing: Optical 3D Metrology improves Safety and Comfort
To speed up design, simulation and development cycles, the automotive industry relies on optical measuring systems. Applications include crash, impact and component tests as well as climate chamber, wind tunnel and fatigue testing.
Casting and Forging Workshop in Brazil
On 5th November 2014, our Brazilian partner Robtec held a Casting and Forging Workshop in São Paulo. Some 50 participants joined the event at the Holiday Inn hotel in order to learn about the latest developments in optical 3D metrology for the casting and forging industries.
CIM Co. held Casting and Forging Workshop in Mexico
On 24th September 2014, our Mexican distributor CIM Co. hosted a user meeting in Monterrey and presented the latest developments in industrial 3D metrology for casting and forging processes to some 30 participants.
GOM 3D Metrology Conference - Save the Date
The GOM Conference from 21st to 24th September 2015 in Braunschweig, Germany will show in user presentations, live demonstrations and the trade show, how optical measuring systems shorten development cycles and improve production processes.
GOM UK Convention 2015
The GOM UK Convention 2015 focuses on the integration of optical measuring techniques in industry and research. The conference offers a platform to exchange experiences about measurement solutions and applications using the GOM optical measuring systems. The GOM UK Convention 2015 will take place from 25-26 February 2015 at The Warwickshire, Warwick, United Kingdom.
Non-Contact Measuring Systems Support Certification of Airbus A350
For the load, fatigue and damage tolerance tests of the A350 winglet, Airbus supplier FACC and its subsidiary CoLT for the first time fully integrated non-contact measuring systems from GOM in the test setup.
Application Webinar - Automotive Testing
GOM invites you to a Webinar which will discusses applications from the automotive industry in the areas of stiffness- and crash testing, motion analysis and the evaluation of thermal deformation of components tested in climate chambers.
GOM Partner Lenso organized 3D User Meeting in Poland
Our Polish partner Lenso held a four-day 3D User Meeting. More than 100 participants attended the event at the Remes hotel in Opalenica, Poland, from 16th to 19th September 2014.
We wish you a merry christmas and a happy new year 2015
This holiday greeting has become a little tradition for the upcoming holidays: For several years now, we have been supporting two organizations which help to alleviate poverty and provide hope. Right now this assistance is especially important.
GOM Italia inaugurated a new location for events
GOM Italia expanded its location, restyling the hangar into a comfortable place, well-equipped to welcome customers and show current products and technologies during events and live demonstrations.
Application Webinar - Biomechanics/Medical
GOM invites you to a Webinar which will discuss various applications for optical 3D metrology in the area of medical / biomechanics testing and quality control.
GOM Testing Workshop: Optical Measuring Systems replace conventional Methods
In order to speed up the product creation process, design and test engineers as well as specialists from research & development rely on optical measurement systems. This is what the exchange of experts revealed at the GOM Testing Workshop.
User meeting in Thailand presented latest developments in GOM technology
In October, our distributor Mentel held an user meeting in Bangkok, Thailand, and presented the latest developments and technologies of optical 3D metrology from GOM to some 50 participants from industry and research.
ATOS ScanPort - New Desktop Scanner for small components
The ATOS ScanPort is an optical desktop scanner for measuring and inspection of small parts. The ATOS ScanPort utilises a 3+3 kinematic with three motorised and three manual axes. Repeating tasks are simplified with the fully automated rotation, tilt and linear axes.
GOM Italia closes for Christmas Holidays
GOM Italia offices will be closed for Christmas holidays from December 25th to December 26th, 2014, and also from January 1st to January 2nd, 2015.
Industrial 3D Scanner with 16 Million Pixels
GOM has extended its series of industrial 3D scanners with the model ATOS Triple Scan 16M. The new 3D digitizer captures two times 16 million measuring points per scan and is suitable for quality control of medium-sized components with high-resolution requirements.
GOM presents latest technology at EuroMold - Order your free ticket
At the EuroMold 2014 in Hall 8 GOM will be presenting the newest developments in precise industrial 3D metrology, including ATOS ScanPort, ATOS Triple Scan 16M and the V8 Software. In Hall 11 GOM’s experts will additionally be showcasing the ATOS Core sensor and ATOS for Education package.
GOM Inspect Introduction Seminars – Dates for 2015
Next year, GOM will be offering new GOM Inspect Introduction Seminars in Braunschweig. On six regular dates, users from the fields of RP, CAD/CAM, CAE and CAQ will get the chance to test GOM Inspect in practice.
GOM France - Bègles Open Days 2014
On November 18-19, 2014 the team of GOM France will inaugurate its new agency in Bègles (Gironde) in the south-west. In the presence of industrial experts from the south/south-west, GOM users and experts will exchange information about technological advances and the latest developments.
Two successful Casting Workshops in Vietnam
In September, our distributor AIE organized two workshops in the north and south of Vietnam. The main objective of the two events was to highlight the importance of optical metrology for the casting industry.
Injection Molding Workshop in Sweden
On September 25, 2014, our Swedish distributor Cascade welcomed around 65 attendees to the Injection Molding Workshop in Mölndal in order to share its experience about the latest trends in the injection molding industry.
GOM Workshop in Italy - 3D Coordinate Measuring Techniques in Injection Molding
The GOM Workshop is an industrial meeting platform for design engineers, tool and mold makers as well as specialists from quality assurance and production. The free workshop offers an insight into how optical 3D metrology is integrated into modern injection molding process chains.
Application Webinar - Aerospace Testing
GOM invites you to a Webinar which will discuss applications from the aerospace industry using ARAMIS and PONTOS covering topics from smaller scale measurement such as coupon- and element testing up to evaluation of sub-components deformation behavior.
GOM Inspect Introduction Seminars – Dates in September, October and November
The next regular GOM Inspect Introduction Seminars will be held in Braunschweig on September 29 and November 10, 2014. There are still some seats available for the date in November. Furthermore, we are pleased to offer an additional seminar on October 06, 2014.
Summer closure GOM Italia
GOM Italia offices will be closed for summer holidays from August 11th to August 17th, 2014 (incl.).
Images replace numbers: Quality assurance of plastic parts with 3D measurement
Since Braun introduced optical measuring systems to its quality assurance process, first article inspection has been accelerated significantly. In addition, the company has been able to simplify technical drawings and inspection reports.
V8 – New Version of the 3D Digitizing and Inspection Software
GOM's V8 software for ATOS, TRITOP, PONTOS Live, GOM Inspect and GOM Inspect Professional has now been launched in the market. The new application solutions provide enhanced optimization of measurement processes and increase inspection efficiency.
New GOM V8 Software / Training Webinars
GOM is launching the new V8 Software with a range of new features for 3D measurement and 3D inspection. In conjunction with the release of the software, GOM is running a series of webinars to give you an introduction to the new software functionalities.
Precise Industrial 3D Metrology
Facebook GOM Metrology
YouTube GOM Metrology
LinkedIn GOM Metrology
XING GOM GmbH