ATOS Triple Scan - Revolutionary scanning technique

ATOS Triple Scan

The ATOS Triple Scan uses a specially developed measuring and projection technology from GOM.

Using this brand new technology the ATOS Triple Scan produces a high accuracy and improved measurement of shiny surface, complete data on complex components with deep pockets or fine edges such as turbine blades, reducing the number of individual scans and resulting in a simple handling.

Blue Light Technology

The ATOS Triple Scan is also equipped with blue light technology. The narrowband blue light enables precise measurements to be carried out independently of environmental lighting conditions.

High Resolution 3D Scanner

High Resolution 3D Scanner from small to large

ATOS uses high resolution measuring cameras with up to 16 megapixel resolution and specially developed optics for precise measurement.

The accuracy, measurement resolution and measuring area are completely adaptable to the application requirements. This allows for the highest resolution for highly detailed, small parts with measuring volumes down to 38mm, or for extremely fast digitizing of large objects with measuring volumes up to 2m.

This flexibility allows measurement of a large part spectrum with the same sensor head, and when used in combination with TRITOP, the ATOS System is capable of scanning parts of over 30m with a high local resolution.

Industrial advantages for industrial processes

3D Scanner ATOS

The ATOS 3D Digitizer is an accurate and cost-effective solution in a number of different application areas including:

  • Quality Control
  • Reverse Engineering
  • Rapid Prototyping
  • Rapid Milling
  • Digital Mock-Up

ATOS 3D Digitizers have been produced and constantly developed since 1995 and with more than 2500 installations in measurement and analysis rooms as well as factory and production halls worldwide, the ATOS has been for a long time an accepted measurement method beside the mechanical measurement machines.

The ATOS sensor combines high data quality in short measurement time with flexibility and stability for industrial environments.

Universal process safety

ATOS 3D Digitizer

The ATOS 3D Digitizer is established in industrial process chains. The integration of ATOS in industrial development and production processes helps:

  • Reduce production start-up times
  • Optimize component quality
  • Speed up the time to production
  • Maintain high level of quality assurance throughout the entire manufacturing process
  • Establish early trend analysis within series production processes
  • Reduce rejects and rework, thus saving valuable time and money
  • Automated quality control; improving overall quality assurance, requiring fewer personnel and considerably increasing performance.

The ultimate combination of optical and tactile measurement

GOM Touch Probe

The GOM Touch Probe combines full-field and touch probe 3D measurement. The GOM Touch Probe allows quick measurement in difficult to access areas, comparison directly to CAD, measurement of primitives, quick measurement of individual points and online alignment.

ATOS and Touch Probe measurements are carried out with one system and are evaluated with one software package. No extra hardware or tracker is required, enabling quick measurement procedures and easy interchange between surface and single point measurement and analysis.

Read more about the GOM Touch Probe.

ATOS Plus - automated Photogrammetry

ATOS Plus

The Plus Box add-on for all ATOS Triple Scan sensors enables fully integrated photogrammetry and reference point collection.

With ATOS Plus a completely automated inspection process can be realized allowing:

  • Process safety over long periods
  • Higher repeatability and reliability
  • Time saving
  • Reduced costs of fixturing

The ATOS Plus solution is fully integrated into GOM's established digitizing and inspection solutions. The Plus Box allows high accuracy, automated photogrammetry and extends existing ATOS Triple Scan sensor heads.

The ATOS Plus features a high resolution photogrammetry camera with up to 29 megapixel resolution and specially developed optics allowing large measurement areas and short working distances. The built-in faceted illumination provides uniform lighting regardless of measurement area or environmental conditions. All ATOS Plus sensors are verified and certified according to VDI acceptance tests.

Integrated, traceable measurement and inspection software

Integrated inspection software

GOM completely develops it's hardware and software in house. The powerful, process safe, traceable ATOS Professional and GOM Inspect Professional software controls the sensor head, processes the 3D point cloud and can edit and completely post-process the data. Through a simple graphical user interface, the ATOS Professional and GOM Inspect Professional software supports today's tasks in quality control, manufacturing processes and reverse engineering. Learn more about ATOS Professional and GOM Inspect Professional in the Software pages.

Technical Data

ATOS II Triple Scan

ATOS III Triple Scan


System
Configurations

ATOS II
Triple Scan

ATOS III
Triple Scan

ATOS Triple
Scan 16M

Camera Pixels

2 x 5 000 000

2 x 8 000 000

2 x 16 000 000

Measuring Area

38 x 29 -
2000 x 1500 mm²

38 x 29 -
2000 x 1500 mm²

170 x 130 -
810 x 610 mm²

Point Spacing

0.02 - 0.79 mm

0.01 - 0.61 mm

0.03 - 0.16 mm

Working Distance

490 - 2000 mm

490 - 2000 mm

440 - 800 mm

Sensor Controller

integrated

Cable Length

up to 30m

Sensor Positioning

industrial sensor stand, automatic per Robot

Part Positioning

manual or automatic rotation table

Image Processing Computer

portable or High-End PC

Operating System

Windows 7

Software

data capture, processing and complete inspection

Material & part finish

measurement of shiny and dark surfaces
& complex component geometries

Ambient lighting

low sensitivity to environment lighting conditions

Environmental vibrations

unaffected due to GOMs dynamic referencing system

Operating Temperature

5 - 40°C, non condensing

Power Supply

90 - 230 V AC

Application Notes

Find out more about the practical use of the ATOS 3D Scanner and view all ATOS application notes.