TRITOP - Optical 3D Coordinate Measuring Machine
The portable TRITOPCMM system measures coordinates of three-dimensional objects quickly and precisely. Measuring tasks that traditionally were performed by tactile 3D coordinate measuring machines can now easily be carried out with the TRITOPCMM system. It does not require any complex, heavy and maintenance-intensive hardware. The measuring machine comes to the object!
As with tactile coordinate measuring machines TRITOPCMM records the coordinates and their orientation in space for any feature of interest:
- Surface points and sections
- Primitives
- Holes, punch holes and edges
- Diameters, lengths, angles ...
After the 3D coordinates have been determined, the measurement mathematically is transformed into the coordinate system of the component:
- RPS
- Gage alignment
- Best-fit ...
The measured and aligned data is used for various tasks:
- CAD comparison
- Verification of shape and position tolerances
- Verification of specifications from drawings, files or tables
- Initial measurements
When comparing the measuring data with CAD data (IGES, VDA, STEP, Catia, ProE, UG ...), the corresponding measuring reports are created in the familiar formats:
- False-color representation
- Deviation of individual points as labels
- Sections, angles and distances
- Diameters and flatness
- Tables and lists
Advantages of the TRITOP Technique
- Complete 3D measuring machine with minimum hardware requirements (2 cases with a total weight of 23 kg)
- The object is not touched during measuring
- Very high accuracy also for large objects
- No wear and tear, no decrease of accuracy
- Easy handling
- Independent of environmental conditions (climatic chamber, open air ...)
Fields of Application
- Inspection of sheet metal parts and car bodies, e.g. in pilot production, process optimizing, tool try-outs, start of series production or during random samples
- Quality control of large objects, e.g. aircraft, ships, wind turbines, etc.
- Verification of plastic parts, e.g. for first article inspection
- Verification and recording of jigs and fixtures
- Measuring of models and prototypes, e.g. vehicle interior and exterior design
- Verification of tubes and wires with respect to their three-dimensional shape
- Measuring trimming edges of two-dimensional sheet metal blanks
- Deformation analysis of car and climatic chamber tests
- Measuring of reference point fields
Technical Data
Using TRITOP, objects of up to some 20 m can be measured. Depending on the measuring task, different camera systems are available. All TRITOP systems are self-calibrating and self-checking.
| |||
|---|---|---|---|
System |
| ||
Camera | up to 21 million pixels | ||
Data Transfer | wireless or flash card | ||
Measuring Area | 0.1 x 0.1 up to 10 x 10 m² | ||
Calibration | self-calibrating | ||
Certification | according to VDI 2634/1 | ||
Operating Temperature | -40 to 120°C |
Application Notes
Find out more about the practical use of the TRITOP Measuring System.
View all TRITOP application notes.